hood pins on dusters

[69DARTS]

lets see pics on the hood pins on the duster demon
any instruction on where to drill holes on hood and core support
thanks

 

[green1]

There are dimples on the radiator support, from the factory.

 

[69DARTS]

There are dimples on the radiator support, from the factory.

n0t that i see

 

[stroked 340]

My duster had the dimples...

 

[drtybttr]

Here is mine. Very simple to install.

 

[69DARTS]

My duster had the dimples...

where

 

[69DARTS]

need to see underhood pics

 

[PanGasket]

need to see underhood pics

You know where those circular bumpers are at the front of you car along the rad support? they should be right around there. They are just indents in the rad support. Sorry, I dont have any pics sadly

 

[MY340]

Here's mine and they were on the car when I bought it but this is for a full bolt on fiberglass hood also.

 

[R72Demon]

The pins bolt to the fender, not the actual core support. There should already be a hole next to the hood bumper/stop for the pin. And on the underside of the hood there should be a hole precut from the hood-bracing. I can get pics. for you of my car tomorrow if you'd like.

 

[RabidScott]

Here's where they go...

 

[Hotwheelsjr]

Here is my driver side pin on my Demon...the hole was already there.

 

[340butterduster]

Dusters and Darts are in different locations. I've posted the following pics in some other thread regarding the same subject.
Here's the pics, and if you need anything else, just ask.


From the front of hood
View attachment 204200

From the inner side of fender

View attachment 204201

From the saddle

View attachment 204202

From the side

View attachment 204203

The same pics, with the measurements are here in post #8 http://www.forabodiesonly.com/mopar/showthread.php?t=61158

All the best!
Giles

 

[drtybttr]

I just put mine in those rubber bumper things on the radiator support and it works great.

 

[Lars]

Mine was like Hotwheelsjr's car. So that is where I put them.

 

[69DARTS]

Dusters and Darts are in different locations. I've posted the following pics in some other thread regarding the same subject.
Here's the pics, and if you need anything else, just ask.


From the front of hood
View attachment 204200

From the inner side of fender

View attachment 204201

From the saddle

View attachment 204202

From the side

View attachment 204203

The same pics, with the measurements are here in post #8 http://www.forabodiesonly.com/mopar/showthread.php?t=61158

All the best!
Giles

thank u