[FOR SALE] HP Head Liquidation.......................$150 pair

-
G

GTX JOHN

FABO Gold Member
FABO Gold Member
Joined
Dec 12, 2009
Messages
2,854
Reaction score
3,660
Location
Boulder City NV.
Rating - 100%
74   0   0
Contact seller
My very close friend and the man who has prepared most of
my cylinder heads for all my race cars has been
sadly forced to close his shop due to Health challenges!

Here is a trailer load of his selected Mopar heads that he
has collected to prepare as ordered by racers.

All have been Hot Tanked/Magged and inspected and then
stored in shop on racks since the last century.

They include:
915 Both Big and Small block
906 big Block/and other numbers
586/596/302/308 and other numbers
Many other numbers as well
These are some of the best core heads that
I have seen since the 1970's

I am keeping the X Heads for myself.

There is one original Max Wedge Head that appears to be
virgin and untouched = $ 950.00

There are 3 Blocks that are standard Hot Tanked or Acid Washed.
Sonic Tested (Good) and inspected for any issues.
These were to be used in NHRA stock or superstock engines and
are the pick of the litter. 383/413/440 = $350 Choice.




All sets are $150. a Pair.
Single heads $85.
Will deliver in So Cal.

I will pack any heads but to back East from Nevada would
not be worth it to you as it would be $100 PER HEAD so not
likely to make sense unless you really need a particular number.

One of the worst things about getting elderly is having to say Good Bye
to your friends!

20230803_153453.jpg


20230803_153735.jpg


20230803_153751.jpg


20230803_153810.jpg


20230803_153822.jpg
 
Last edited:
Mtrhead said:
How's the big block 915s look?
Click to expand...
They look great BUT a couple guys ahead of
you.
Seats are high and guides look good as well.
He only kept the best he came across over years.

One gentleman may buy all the 915 Big Blocks already and
possible the Max Wedge as well
 
Looking for 67/68 273 closed chamber heads, not sure of the casting numbers.
 
Plymouth 65 said:
Looking for 67/68 273 closed chamber heads, not sure of the casting numbers.
Click to expand...
Plymouth 65 said:
Looking for 67/68 273 closed chamber heads, not sure of the casting numbers.
Click to expand...
Those would be the '66-7 heads if you're looking for the closed chamber with the later intake bolts. 920 is the casting number. the '68-up heads are open chamber and are 675 castings. The 64-5 heads are 315 castings.
 
Big Block 915's are all sold.
302/308 Small blocks all sold.
Still some really nice 915's small blocks
available.
Lots of other numbers available.
These are all very nice with no sunk valves =
that have been in storage for 40+ years.

Thanks to everyone!
 
440 and 383 Blocks are now Sold.
I have spent that much having
one hot tanked/sonic tested/Acid Washed
 
Last edited:
Only 413 Standard Industrial Blook still available and
perfect for a 426 Standard bore and still nice enough to remain
413 Standard with little taper. Run in the Oil Fields with clean Propane
and a really NICE piece.
$350. OBO
Can Deliver anywhere in So Cal for free.

Also very Nice Max Wedge 286 Head legal for 413 and 63 426
$750. OBO
 
Buy Four or more sets for $75.00 a set and
they could go on a Pallet to Fastenal or other shipper and
the savings could recoup the shipping expense or more.


I just brought back another trailer load of 50+ more Pairs.
915 Big Blocks and 308 small Blocks ae all presold already.
 
You must log in or register to reply here.
-

Back
Top