[FOR SALE] HP Head Liquidation.......................$150 pair

-
Status
Not open for further replies.
I have a number of sets of 587 heads
$125.00 a pair but they will probably all
have some evidence of surface hairline
none leaking cracks after I acid cleaning and
mag them. Probably will never leak as stated above but
I never use them on my Stock/Superstock cars that I am going
to put several weeks of work into them.
$125 pr.
$100 pr. if two sets bought at same time.

I still have a well over 100 heads left on the shelf after
selling a real bunch of them. Many Disassembled and Hot Tanked or Acid Washed
and magged/pressured check. Many have had the valves discarded and are bare as
we never use the stock valves on any builds.

I am 75 and coming to The end of my building engines and Drag Racing Career.
 
Last edited:
Many dozens (Close to 100 at least) and even a Max Wedge 286 Head.
Shipping Back East is so expensive that it would not be worth it even if
I gave you them for free except maybe if you needed the Max Wedge for
a project to complete it.

A 72 340 would come with a 1.88 J 915 Head as I recall. I have only seen 587
on 73 up myself. In my testing the 587 is not a significant improvement on Air Flow over the
915.
 
Do you have any 915 Small Block Js with 2.02s with decent guides? or are they all rebuildable cores?
 
All these that I have are being sold are cores.
A lot are probably good shape but I am selling them
as cores.
 
GTX JOHN said:
Many dozens (Close to 100 at least) and even a Max Wedge 286 Head.
Shipping Back East is so expensive that it would not be worth it even if
I gave you them for free except maybe if you needed the Max Wedge for
a project to complete it.

A 72 340 would come with a 1.88 J 915 Head as I recall. I have only seen 587
on 73 up myself. In my testing the 587 is not a significant improvement on Air Flow over the
915.
Click to expand...
Just kicking tires here. So would you ship to the west coast. I have a connection that comes east and would deliver them for me.
 
Thanks. I'm just asking for a friend. Let me find out exactly what he is looking for.
 
Still have a shop full.
Most are from lengendary Mopar engine builder and
champion racer the Late Gregg Luneack!
 
Down to the very last 3 sets of 915 J heads

1 used set complete and right of a Car $175 with springs and rockers
that look OK to bolt right on.

2 sets Hot Tanked or Acid washed plus magged, and pressure checked.
Valves and springs have been discarded ( We do not use them ).

These are out of my good friend (RIP) who was one of the very top
engine builders and Stock/SS Racers on the West Coast.
 
Status
Not open for further replies.
-

Back
Top