I wish it was closer craigslist finds

-


Just down the road about 45 miles. A little far away from being a driver for me though.
 
Thought someone might find this interesting, especially if it is as advertised - located in southern CT...
1967 Dodge Dart
ad states: "1967 dart, 273 Comando motor, posi rear, automatic. Matching numbers. $3,500"

1967 Dodge Dart

00S0S_b77N3l9dLpv_600x450.jpg


00H0H_elaI0NDW5Bs_600x450.jpg
 
Last edited:
Another post someone might find interesting:
Mopar 318 crate engine
Location: south coast of MA, Ad states:
"Hey guys so I have 1969 318 bored .30 engine was cleaned and honed new rings, bearings, new cam bearings, freezeplugs. Engine has new stock 318 heads with comp springs. Engine currently has a Hughes whiplash cam with new lifters and pushrods. Engine also comes with a new edelbrock performer intake and mopar performance valve covers. Engine does not come with timing cover or water pump. Very low miles roughly 1,400 miles reason for pulling was bigger engine swap. $300"

00303_j8PnTbbJFBq_600x450.jpg
 
I get that people are free to ask whatever they want, but I think this guy is high and from the way the ad reads he does not know what he's got but thinks old = $$$ even though there is not a panel on the car that looks worth anything but scrap.

That aside, I know 66 is a one year only for a lot of parts so I'm passing this along in case anyone wants to contact him and see if he'll sell some specific parts. Looks like tail lights that could be refurbished, a good grill and some trim. I'm on my phone so can't see too clearly but the Ben Hurr chariot spike on the back wheel looks fun.

Located in north east CT. Ad reads:
66 Dodge Dart V6 - $1000
This is a 1996 Dodge Dart. Sat in the woods for a few decades. The motor DOES turn over. But pretty much a part out kinda deal. Trim is all there and tail lights are intact. I’m asking $1000 OBO
Here is the cl link and pics:
66 Dodge Dart V6



01717_gioTVdQgjku_600x450.jpg


00i0i_2J8FuL5Vlss_600x450.jpg


01212_cLP93BGOaNu_600x450.jpg


00L0L_eQ7nVgDIRDF_600x450.jpg


00V0V_vBeZaQ4ZFf_600x450.jpg


00C0C_43P74HnRVsz_600x450.jpg


01212_cLP93BGOaNu_600x450.jpg


00O0O_1bypXsrMxDJ_600x450.jpg


00C0C_cAXfDYdkvF9_600x450.jpg
 
64 Dart 270 said:
I get that people are free to ask whatever they want, but I think this guy is high and from the way the ad reads he does not know what he's got but thinks old = $$$ even though there is not a panel on the car that looks worth anything but scrap.

That aside, I know 66 is a one year only for a lot of parts so I'm passing this along in case anyone wants to contact him and see if he'll sell some specific parts. Looks like tail lights that could be refurbished, a good grill and some trim. I'm on my phone so can't see too clearly but the Ben Hurr chariot spike on the back wheel looks fun.
Click to expand...

I thought it was a log splitter or something at first!
 
Not mine. Thought someone might be interested:

"2 1965 Plymouth Barracuda's - $1450 (Pen Argyl / Ottsville)
I have two 1965 barracudas that are being sold together. One has paperwork the other does not. One was an original 273 automatic car the other was an original slant 6, 4 speed with Factory air. There is a ton of parts, trim, interior, doors, hoods, glass ECT. I'm asking $1,450 for both cars I will not part them out they will be sold together or not at all. One of the cars is located in Ottsville Pennsylvania 18942 the other car is located in Pen Argyl Pennsylvania 18072 do you have any questions feel free to email me I will get back to you in my earliest convenience. I have a bunch of pictures and will send for serious inquiries only. Thank you for looking.
"
2 1965 Plymouth Barracuda's

00f0f_eREEz1Vn61j_600x450.jpg
 
Lots of good parts on this car...for $1000 (probably negotiate lower) worth it to the right person.

74 Dodge Dart
/6 runs good lot drives. Lots of rot. Interior is pretty nice fiberglass front fenders are good grille and taillights in good shape. Clean title. Not road worthy and would take new frame front and rear to make road worthy. I was going to use the body for a project but have went a different route.

1000$
 
Not mine, but thought someone might be interested in this 340 (location is south coast of MA):

Chrysler marine 340 engine

Chrysler marine 340 engine - $1 (Swansea)

condition: good
make / manufacturer: Chrysler
model name / number: 340

Engine is one of 2 that came out of a boat that had been totaled on land (I kept the right hand rotation, rebuilt and put in my boat). This is the left hand rotation engine (automotive) that I don't need, would be good for someone looking to restore an old dart or demon. BRO
 
10 pages and still the listings that are too far away from everyone else are also too far from me!
 
Would take a bit of work, but this would be a beast/great car hauler and the seller only wants $500. Located in North Jersey.

1972 Dodge D-300 1 Ton 4wd plow truck

1972 Dodge D-300 1 Ton 4wd plow truck - $500 (Newton)
Barn find! 1972 Dodge D-300 1 Ton truck. It has what looks to be the original 360 engine and 4 speed transmission. It's 4wd and a dual axle. Looks to be a hydraulic dump body on the back. Cab has some rust but it's all there and frame looks good. Also has a plow mount and a plow is included. I have some old registrations but no title. Looks like last registered in 1984. I also have the ignition key. Would make a great "will it run" Youtube video. Or a good start for your mopar build. Best offer.
 
You must log in or register to reply here.
-

Back
Top