Check here. You can reach it in the car without removing the windshield. Not easy but can be done by someone with little arms and Belly.
Watch the video
Watch the video
Is your 67-76 A-body windshield leaking ?
- Thread starter Oldmanmopar
- Start date
-
JDMopar
Well-Known Member
Thanks Steve. I learned something new today! 
Deffinetly something to watch when removing glass .nice video!
Appreciate the video, but that hole area you are referring is in no way connected to the square hole cowl drain. Thats a completely separate piece spot welded on. packing it with dum dum does absolutely nothing for a leak.
340sFastback
Well-Known Member
Most of times glass shops fill drain holes with sealant which can prevent draining.
WhodatReggie
Well-Known Member
I need an explanation. Does the leaking really stop with dum dum pressed into the little bracket at the end of the straw shown in the video? Assuming no rust out in the trough. I've got a 67 Barracuda that leaks in the front windshield mainly on drivers side. Car has good rubberstrip. What does anyone say?
WhodatReggie
Well-Known Member
I guess nobody knows....I am shocked someone has not said anything.
Last edited:
I have a leaker we are going to fix shortly I will post a new video when we fix it.
WhodatReggie
Well-Known Member
that works for me...
67Dart273
Well-Known Member
Steve, my friend, you need to write that book!!! LOL
Kendog 170
Let the boy go !
I was told to use this for leaking windshield gaskets. Doesn't harden. Put it in the gasket grooves before installing. Gets messy so have rags and wax and grease remover. Still haven't done it but did buy it.
Billybryson54
Member
The video is no longer available here...is there somewhere else it can be viewed?
208Dart
Well-Known Member
Same for me.
This has been my observation as well......I will have to take a closer look before the windshield goes in.
following...
-
