Last one to post in this thread wins!
- Thread starter oldkid
- Start date
-
Yunick13
3 Time FABO NASCAR champ 2023 FABO NHRA champ
Yunick13
3 Time FABO NASCAR champ 2023 FABO NHRA champ
Yunick13
3 Time FABO NASCAR champ 2023 FABO NHRA champ
Unless its in your under ware
Ahoey
Well-Known Member
Looks really
looks really good, bet it would look good on the dart. I have two colour match spray bombs. Which were mixed by a local auto body supply store, took the trunk latch off and gave it for sample. He showed me the test cards up against my car and I really couldn’t tell the difference. Would that be enough to paint that chin spoiler
Frodee
Off center a bit
Morning gang.
Frodee
Off center a bit
It should be enough. Just did one using gelcoat and getting easier I should be able to have system down to make them faster real soon.
Figure you can bring your car here and we can paint and install the spoiler so you can get it back over the border without any tax.
Your choice.
Ahoey
Well-Known Member
If what I think you’re talking about is the main caps were walking around on the block. Have seen them peen the block and line bore it. First block in pals race car did that the fix worked good for many years till he dropped a valveId rather talk about Mopars.18436572. Made a trip to the machine shop yesterday. Delivered the oil pump shaft and bushing. They told me the main caps were all jacked up. Showed me the looseness. These guys a learning me things I never heard of. They know their stuff.
Ahoey
Well-Known Member
Going to work on that hopefully things work out. Now that I got F,A to do and all day to do it chances are.
Frodee
Off center a bit
Depending on the paint you have on dry time but installing it doesn't take long only have to drill 4 holes in your bumper brackets.
I'll have all the hardware to install it.
Will be nice to try it out on another car besides mine.
Ahoey
Well-Known Member
Well as far as I know the car has never been repaired. So all the extremely tight factory tolerances should be there
Frodee
Off center a bit
My bumper was repaired once and has a few dents in it now but I still think it is close to factory.Well as far as I know the car has never been repaired. So all the extremely tight factory tolerances should be there
morning guys.
quite the day yesterday.
last app was the fracture clinic yesterday aft.
they took xrays and then the dr came in... a young guy and his rating is 4.9 out of 5.
he looked at the xray and said wow your shoulder is full of arthritis.
he showed me the xray and showed me the problem.
I have a humeral neck fracture. at the top of my arm bone there is a ball that fits in the socket. the crack is right at the bottom of the ball. so long story short I have surgery to replace the ball on either jan 3 or the 10th.
he's got a great sense of humour ao asked if had a car payment that day,,, he laughed out loud so I liked him right off. so here is my xray so look for the white line right at the ball.
have a great day guys
quite the day yesterday.
last app was the fracture clinic yesterday aft.
they took xrays and then the dr came in... a young guy and his rating is 4.9 out of 5.
he looked at the xray and said wow your shoulder is full of arthritis.
he showed me the xray and showed me the problem.
I have a humeral neck fracture. at the top of my arm bone there is a ball that fits in the socket. the crack is right at the bottom of the ball. so long story short I have surgery to replace the ball on either jan 3 or the 10th.
he's got a great sense of humour ao asked if had a car payment that day,,, he laughed out loud so I liked him right off. so here is my xray so look for the white line right at the ball.
have a great day guys
Frodee
Off center a bit
Ahoey
Well-Known Member
I am fortunate to have found another 74 dart for parts only a 318 car but bumpers, glass, grill, headlight doors etc. are exact replacement parts. It was a steal “haul that piece of **** out of here and it’s yours”. Grabbed a chain from back of truck, blew up one tire and dragged it 6 miles home. Haven’t raped it for to many parts yet but it’s what you call in stock items.
Ahoey
Well-Known Member
Sausage stuffing today, smoking tomorrow. Spent the last 3 days cutting, packing, grinding meat 2 hogs 2 deer and a moose. Can see the light at the end of the tunnel now. Good thing this only happens once a year. We were talking last night grinding meat, if the cops ever sprayed that iluminall in this shop you wouldn’t need lights it would just glow
That is what they are doing. peen, swedge, whatever you want to call it. The LA's are a little different. It has a step to the fitment. It is a little more difficult than say a chevy.
Swingin Chrome
Well-Known Member
Sorry to hear that Mark. Ask him if he will be replacing the ball joint with a Moog one, with a lifetime warranty.Lol.RJ
Hopefully it does the trick. I've had both shoulder worked on with great success. Get ready for a lot of PT.
one for now but if all goes well which I'm sure it will then I go for the right shoulder as well then no more rice krispy shouldersYuck Mark put some cloths on.
Both shoulders or just the one?
been an overcast day but not really cold.
son's 47th birthday today.
he's been cutting up pigs today but he also gets a load for xmas from the in-laws.
have a great evening.
got ribs simmering in the oven all afternoon in honey garlic sauce.
son's 47th birthday today.
he's been cutting up pigs today but he also gets a load for xmas from the in-laws.
have a great evening.
got ribs simmering in the oven all afternoon in honey garlic sauce.
How do you plan on marketing all of them or are they all spoken for?
Ahoey
Well-Known Member
Just finished stuffing, wow is meat processing ever hard on the crown. Cut down on sausages this year only 65 easy part tomorrow only thing the vultures ( my pals) will be circling looking for taste test.
Ahoey
Well-Known Member
-
