QuickDart360
Well-Known Member
Can you share rear wheel backspace? 15x8's?
Lets see your cars.........
- Thread starter 8 second dart
- Start date
-
Bluecuda340
Well-Known Member
Yes they are 15x8 with I believe 3 7/8 back space. I also run some 15x8s with a 4.5" Backspace but with a 1/8" spacer.
I run a Dana that is narrowed a small amount to fit a 28x10.5 or 275/60 without rubbing.
I run a Dana that is narrowed a small amount to fit a 28x10.5 or 275/60 without rubbing.
Last edited:
RockinRobin
Well-Known Member
RockinRobin
Well-Known Member
I really need to get to that track. Been trying to get out there for years.
QuickDart360
Well-Known Member
Could you please share the rear wheel backspace? Are they 15x8's? I want to get that stance and look for my dart.
Lol, yeah what a junker !
1 of my dream cars
turbofreek
batcrap crazy racing team
little idle music?
If I wasn't married I'd ask your dart out on a date she's sexy
K.O. SWINGER
Meeting in the alley since 1976
Just a old street fighter .
Hi, been a long time, Yes 15x8's, I had a set of 8" rally wheels on it but they were REALLY heavy, they had 5-1/4" backspace I think, went with the Welds but could only get them in 4.5' BS. so I cut the housing 3/4" each side and lopped the same off the ends of the axles [mosers with about 4" of spline]. Made my own offset spring hangers to move the spring hard against the chassis rail and now had room for 275/50-15 ET streets. Hope this helps
RBConvert
Well-Known Member
First look: How does it burn out without a driver?
Second look: Australia. Got it.
Great looking car. How much fiberglass is on it?
The bars and the hood are glass, still got the mint steel hood that the mold came from.
Last edited:
Mouse action
Well-Known Member
how can you tell the difference ?
1969cuda
Well-Known Member
Not a car, but one of my other hot rods.
-
