Rocker Panel Chrome Molding

[RichardJ916]

Did any one find the clips yet for the 2" wide trim

 

[Sedanman]

I have a set of 73 and up 2 inch rocker trim with clips and end screws if anyone is looking.

 

[RichardJ916]

I am still thinking about it....
I still may

 

[1972DusterPaul]

Did any one find the clips yet for the 2" wide trim

Jim's is the only place you will them....that's where i got mine.

https://www.jimsautoparts.com/molding_clips.htm

Previous owner broke all the original clips...then siliconed the trim on the car.

Paul

 

[RichardJ916]

The Gentleman from Post # 11 said they do not carry them any more...

 

[Sedanman]

How about these? http://www.ebay.com/itm/Cuda-Dart-C...uth|Model:Valiant&hash=item2c5e4c8f29&vxp=mtr

 

[RichardJ916]

They could be the right ones. I am not sure, someone here that has a set should be able to tell.

 

[KnuckleDuster]

Too small at .875"
Just checked my mouldings, clips should be about 1 3/4".


Btw.. my car is also missing one pin. Anyone know a source for them also?

 

[1972DusterPaul]

The Gentleman from Post # 11 said they do not carry them any more...

Personally I would pick up the phone and call.

Jim's website said he had 2" clips for Chargers...maybe those can be substituted?

Otherwise you need to contact every vendor you can find who sells any kind of molding clips and hope to get lucky, very lucky, if rocker moldings are your dream.

I looked a long time for alternatives and bit the bullet with Jim's in the end.

Paul

 

[1972DusterPaul]

Btw.. my car is also missing one pin. Anyone know a source for them also?

If you are talking about the pins mounted on the body...Ebay...seller id is sscautoparts

You drill a small hole then screw in these new studs.

Paul