[FOR SALE] Rusty Crusty Dent & Ding Sale

[RAT ROD AL]

I pulled all these parts of the 67 & 68 Barracudas I am parting out. Prices + shipping from FL. Paypal F&F or PMO .

#1. SOLD. SOLD
Stripped the seats down to the frames. Has surface rust but not rotted though anywhere. Frames , seat backs and hinge hardware included.
$150.

#2
SOld. Sold
Seat brackets and sliders. Sliders move freely, the brackets are a little rusty on bottom and one has a hole rusted through.
All studs intact. $75

#3
sold. Sold
68 Power Steering Floor shift column. $125. Pretty clean and in good condition.

#4


68 Power Brake Booster Brackets. $30. Moves freely

#5

Rear seat parts . $25 for the lot.

Scroll on down for more parts. Claim parts by # listed ! Thanks for looking.

 

[Princess Valiant]

Pm sent on the seats

 

[RAT ROD AL]

#6

$50
68 V8 SB after cleaning I found some rust through .

Right front , needs a patch job.

#7
$50
67 V8 SB modified for BB. Good useable condition.

Note how it's squared off for the oil pan clearance and notched for the oil pump.

#8
Upper A arms good condition , will need new bushings and ball joint . $40 for the pair.


GONE !!!!!!

#8
Lower control arms. Good condition , will need new bushings also ! T bar adjusters moved freely.
$40 a pair.

#9

OEM 67 Dash pad. If you can use it, fix it up some .$50 All mounting studs intact.

More parts below ! Check em out .

 

[Mopar Momzee]

Sent PM on steering column

 

[RAT ROD AL]

#10


All studs in tact. $40 Left side fender bling

#11

SOLD SOLD
$75
Deck trim. Not perfect ( but what is ) I will include a few of the clips I salvaged so you can figure out what is needed.

#12
$30 for the pair Crusty but intact.

#13

Fastback trim under side windows. Door trim has some small dings from removal 1/4 glass trim is ok.
$25

#14

$35 A little pitted but not terrible

#15

69 Tail panel . Has some dents and dings. Mostly on the upper & lower edges
$70

Thanks for looking , please claim by # listed . I can send more detailed pics if wanted.

 

[YY1]

Do you have any of the other power brake parts?
Is the pedal assembly different than a non PB one?

 

[RAT ROD AL]

Do you have any of the other power brake parts?
Is the pedal assembly different than a non PB one?

I do have the pedal assy. Doubt if it's different, but not sure.

 

[YY1]

Thanks.
I don't know either, but the linkage sure is.
How about a booster?
Even a core.
I'm thinking about converting my 67 wagon to PB.
Pretty sure this stuff will work.

 

[RAT ROD AL]

Thanks.
I don't know either, but the linkage sure is.
How about a booster?
Even a core.
I'm thinking about converting my 67 wagon to PB.
Pretty sure this stuff will work.

Yes I still have the booster core. PM me if interested in this stuff ! Make you a deal .

 

[YY1]

Will do in the am.

Bushed.

Rough week.

 

[YY1]

PM sent on PB stuff.

 

[Brooks James]

No 9. Will the dash pad fit a 70 Dart ?
If so,I'll take it if it's
Not spoken for

 

[RAT ROD AL]

No 9. Will the dash pad fit a 70 Dart ?
If so,I'll take it if it's
Not spoken for

It will. Pm me your info please

 

[moparmark65]

Any wheel well trim? I need drivers side rear! Thanks!

 

[4spdragtop]

Hi Al, I'm looking for 68/9 rear fastback trim. Just 1 pc, top left.

 

[RAT ROD AL]

Any wheel well trim? I need drivers side rear! Thanks!

Nope

 

[RAT ROD AL]

Hi Al, I'm looking for 68/9 rear fastback trim. Just 1 pc, top left.

View attachment 1716293829

Nope

 

[Swinger 340]

It will. Pm me your info please

69 and 70 are the same, I think the 67 and 68 are different. 67 may even be different then the 68'.

 

[Brooks James]

Mines a 70

 

[Swinger 340]

Mines a 70

You can buy them online. You may need to use your core. Finding a original one may be more difficult to find and more expensive. Also, they would be fragile and break easy as to crack. I never bought an aftermarket one, but I have seen some good ones and some bad ones. Do your research.

 

[Brooks James]

I need it as a template for a custom dash
Thanks

 

[RAT ROD AL]

67 Dash pad us still available !

 

[RAT ROD AL]

Some stuff still available !

 

[4spdragtop]

I'll bet the 67 cuda dash will mount right up where 70 mounts. The difference is 67 has an ever so slight lip/ledge in approx the middle.
The 68 cuda dash is 3 pc and the ends on top piece are tapered to fit in the 2 bottom pieces.

69 and 70 are the same, I think the 67 and 68 are different. 67 may even be different then the 68'.