yup, shorties. should be able to get them tonight
SANDERSON HEADERS
- Thread starter cawley
- Start date
-
I believe there is a sticky about the TTI shorty headers installed in kursplat's Valiant.
Actually the entire TTI system for the A body.
The easiest headers I ever installed. Fit perfect and no hammer needed.
Actually the entire TTI system for the A body.
The easiest headers I ever installed. Fit perfect and no hammer needed.
yup, your nice write up. linked it in the first page
DrCharles
Well-Known Member
What is that round steel rod behind the #8 tube up to the firewall?
scott657
Well-Known Member
Looks like a brake line
pishta
I know I'm right....
Thats a nice setup. 67's are wider than 65's.....
DrCharles
Well-Known Member
Not that one, the bigger one coming out of the firewall at a downward angle...
i'm not sure which one you mean, so red is transmission tube and yellow is b rake line
ya, i've never had an early A, i don't know how you guys work on them. i'd do a tilt front end first thing
DrCharles
Well-Known Member
No, not those... THIS picture 
pishta
I know I'm right....
trans tube filler?
DrCharles
Well-Known Member
Thanks! I've been driving manual transmission vehicles for so long I forgot what an auto dipstick tube looked like
Barracuda 65
Well-Known Member
Question guys...I'm in the process of rebuilding my 65 Barracuda 273 LA V8, A833 4 speed, with power steering and considering installing the Accurate brand, original style Hi-Po exhaust system. If i wanted to add headers are the Sanderson short headers same length as stock manifolds in order to match up to the "original" style exhaust header pipes? Also should I do this with the engine out or installed? I'm new to this so I'm learning as I go.
Thanks
Thanks
-
