just talked to Schumacher tech line on this engine being off level some and he told me that looking at the engine, if you cannot tell it is not level, it is fine. I told him that according to my level it is about 1/2 " lower on the pass side than the driver side and he said that is fine. He would like to see a 1/4" difference if possible. I told him that if I raised the engine the 1/2", I wouldn't be able to turn the steering wheel. He told me that I would be fine with that. that's good. Other problem is, I am heading to the driveline shop to get my driveshaft shortened. It will all but go in back there. I was afraid of that.