Seized throttle shafts in 4150

[fishmens67]

Makes sense and a good sized punch to not flare the shaft ends.

I have a nice set of brass punches for that type of work.

 

[fishmens67]

The end result may be worse than a worn throttle shaft if that sucker is seized that bad.

 

[Mike 340]

Success!!
I ended up soaking it in CLR for about a hour and a half, washed it with water and followed RRR advice and started tapping it with a hammer back and forth adding WD-40 and it started to move and after about 15min they were out!
Thank you for all your help and opinions.
Mike.

 

[Newbomb Turk]

Success!!
I ended up soaking it in CLR for about a hour and a half, washed it with water and followed RRR advice and started tapping it with a hammer back and forth adding WD-40 and it started to move and after about 15min they were out!
Thank you for all your help and opinions.
Mike.

RRR is pretty tricky.

 

[fishmens67]

RRR is pretty tricky.

Not really, it's just commonsense I gave the same advice. and I ain't that smart.

 

[CRUZE 418]

I'm not either, what does CLR stand for?

 

[jimjimjimmy]

I'm not either, what does CLR stand for?

calcium lime rust

 

[CRUZE 418]

Thank you.