Will_H#24
Well-Known Member
I just noticed on the lift today that my 4 speed reverse shaft seal appears to have a slight leak. Do you know where I can buy the seals and can they be replaced without removing the trans? Thanks for your help.
Not trying to pick a fight here, but are you suggesting to pull the tail with the main box still on the BH? I mean I guess that is doable, altho I've never tried it. It would sure save time!Has to come out . Best way is to turn the tail shaft and press out the pin holding the reverse gear. . You may get lucky and not rip the gasket. But if it was mine I would Tear it down reseal it and take a look inside. Unless it was just rebuilt.