[FOR SALE] small block OEM bolt on timing tabs-

-
Status
Not open for further replies.
J

junkyardhero

Well-Known Member
Joined
Jan 23, 2005
Messages
4,783
Reaction score
7,221
Location
Los Angeles
Rating - 100%
11   0   0
Contact seller
three used bolt on OE timing tabs. cleaned and inspected, great shape.

$30 each + shipping

liFIpSTl.jpg


O3FTwjHl.jpg


8Qfe9PYl.jpg


mKB1Vt1l.jpg

7ACljlkl.jpg

3Hq2Ipil.jpg
 
I might like one of the ones with red or yellow zip tie, but is there a difference between them?

I have a 67 with this one, are there different years?
1724892531819.png
 
dusterbing the peace said:
I might like one of the ones with red or yellow zip tie, but is there a difference between them?

I have a 67 with this one, are there different years?
Click to expand...
there's no difference between the two with the zip ties, i only did that to identify them.

there are different styles for different years, those all came off of earlier engines. however any of them work.
 
dusterbing the peace said:
Could you measure from the zero line to the center of the adjacent bolt hole to confirm please?
Click to expand...
sure, why not. if they haven't sold by the time i get back to the shop tomorrow i'll gladly measure them up.

however, i'm wondering why you'd want this measurement? are you in doubt of what you have on your motor? or are you unsure in the veracity of my claim of what these are?
 
junkyardhero said:
sure, why not. if they haven't sold by the time i get back to the shop tomorrow i'll gladly measure them up.

however, i'm wondering why you'd want this measurement? are you in doubt of what you have on your motor? or are you unsure in the veracity of my claim of what these are?
Click to expand...
I don’t know the interchange in years, they clearly aren’t what’s on my motor, but if the measurement is the same then I’ll purchase one if still available.
 
dusterbing the peace said:
I don’t know the interchange in years, they clearly aren’t what’s on my motor, but if the measurement is the same then I’ll purchase one if still available.
Click to expand...
67 commando 273 has a hole in it

www.forabodiesonly.com

Correct 1967 Timing Tab for the 273

@BPTracing For those who would like to know what the correct style timing tab for a 1967 272 is here is a picture of mine. It should have the hole in it. Alan
www.forabodiesonly.com www.forabodiesonly.com

these are for earlier motors, however the measurements are the same-- it's all small block
 
junkyardhero said:
67 commando 273 has a hole in it

[/URL]

these are for earlier motors, however the measurements are the same-- it's all small block
Click to expand...
Thank you for sharing the post, and while I can understand that there shouldn’t be a difference because Chrysler wouldn’t want to pay for different balancers…they went to the effort of making different tabs, so I’d really like the measurement when available please.
 
junkyardhero said:
well, i guess it depends on how you measure it.

*shrugs*
Click to expand...
There are at least 5 different ones that I know of....I have 3 of them currently to measure. There are lots of differences between them. As you found out, the spacing is different on some of them. Also, the graduations on the gauge go from 4 on the early ones, to 6 on the next series, to 9 on the later ones. The width of the gauge varied too, from 3/4" wide to 1/2"wide. The ones with the tube were meant for models with hard to see timing marks, like some trucks, vans, and industrial use. They used a special timing light that plugged into that tube.
 
Status
Not open for further replies.
-

Back
Top