DartGTDan
'71 Dart GT Fan
My '71 318 freshly rebuilt (over the 2021-2022 winter)
Small Block Showroom!
- Thread starter gagembassett
- Start date
-
Matts440
Well-Known Member
Thanks for posting the link
Outasite
Well-Known Member
Yes, I am also thinking twin turbos, saw a kit for $1800(yeah I know 4 times that to install and tune), lots of great info there !!!
Man, I've always wanted a blown small block!
Matts440
Well-Known Member
Well feel free to ask any questions, lots of great help on the forced induction forum here, lots of knowledge here.
These are my first. The little B&M is on top of a 408 in my 74 dodge 4x4. While it runs good and makes 570 ft lbs It wasn’t enough for a 5,000 lb truck. I’m sure it’d absolutely rip in a light A-body.
I wanted more boost so I’m swapping to that 671.
Here are the 3 in my garage:
That looks really nice!
Showoff. lol
Just a Teen!
340six
Well-Known Member
- Joined
- Jan 4, 2009
- Messages
- 1,281
- Reaction score
- 1,798
Another. 422SIX more milder at 10.88 ported Eddie heads and intake. Custom Solid cam, 1.5 comp roller rockers. Showing
Cam degreed. Then they made sure intake fit. So I could take it to sand and polish. They also gave me the ported heads back bare so I could do same to them.
Cam degreed. Then they made sure intake fit. So I could take it to sand and polish. They also gave me the ported heads back bare so I could do same to them.
Last edited:
340six
Well-Known Member
- Joined
- Jan 4, 2009
- Messages
- 1,281
- Reaction score
- 1,798
Took intake home so could be made pretty. Heads taken apart taken home for same sand polish.
Machine shop owner says wow between his port-polish, bowl work, and my cosmetic work to make look nice. Says can't think of other sets have had more time spent on them.man hours wise.
Machine shop owner says wow between his port-polish, bowl work, and my cosmetic work to make look nice. Says can't think of other sets have had more time spent on them.man hours wise.
Last edited:
efar
Coastal Cuda
68 Formula S Barracuda original-Day 2 340
hollywood hig
King of the assklowns
i'll play, here's my 412...
chrgdrt
Well-Known Member
on the stand and in the car
MichaelB.
Well-Known Member
This thread is great. Such a fantastic bunch of photos of great work.
My photo is from back in the day when I swapped out my 360 for a new seasoned block 408. Eddy port matched heads to an air-gap with a Holley Dom 850, small spray and some TTi big tube long collector headers.
Keep the photos coming. They are great to see.
My photo is from back in the day when I swapped out my 360 for a new seasoned block 408. Eddy port matched heads to an air-gap with a Holley Dom 850, small spray and some TTi big tube long collector headers.
Keep the photos coming. They are great to see.
Cliff Ramsdell
I'm just a guy.
68 GTS with its original engine rebuilt. 372” 284/484.
Cliff Ramsdell
Cliff Ramsdell
SSG_Karg
Enhanced member
422” W2, Solid Roller. 10.75-1, ‘70 340 block, Bloomer stroker kit.
SPACECOWBOY
Well-Known Member
-
