Stop in for a cup of coffee

-
Evening all.
Dam lincoln. steel pressure line runs along rack rubbed through and started pissing oil.
cut/flare and re-route so i can get at fittings to tighten. not pretty, but im not pulling rack to route it back in original location.
About 3 hours and one dent in my forehead :BangHead: walked into hoist again.

I do that way to often on this dang boat.
 
Of course it doesn’t take much to annoy me right now. Halfway into my first shift back at work since Turkey day. Fix this. Fix that... AND I forgot the keys to my tool box. :BangHead:
 
So, those that bought from Speedmaster today. Were you able to get the free shipping for anything over $100 as claimed on the home page?
 
Maybe it was newt point. But then we would have to determine if it could have been a salamander. :rolleyes:
Or this Guy...

03BF78B6-02AF-4149-A0C6-AFC9D5F3515B.jpeg


5B541F1B-8A35-4935-B882-DBD9DC5B0D26.jpeg
 
Of course it doesn’t take much to annoy me right now. Halfway into my first shift back at work since Turkey day. Fix this. Fix that... AND I forgot the keys to my tool box. :BangHead:
At least you didn’t get told to completely redesign a project that’s been in the works for 3.5 years and told you have until Monday
 
Yep! And everything else I ordered with them was free shipping as well.....
Sweet, I’m curious as to their quality. They’re stuff seems cheap but supposedly not Chinese made but Australian
 
Finally getting some work done when I turn fabo and computer off and get busy.

It was like 65 degrees and beautiful weather to work in the garage. So i did.

It was still a little cold but not bad because my heater is still down. So I opened all the garage windows and doors and let in the warmer air from outside.
 
Got the v8 k frame relatively easy but the strut rod on the passenger jammed me up and cost a bunch of time.

Let's just say, it was a wrestling match

20191202_162921.jpg


20191202_162932.jpg
 
-
Back
Top