Stop in for a cup of coffee

-
Tooljunkie said:
Last time i did that, i found all 3 spindles were pooched. Bought 2 new ones and used the best parts left to patch up the 3rd one. Sure cut a lot better after.
Click to expand...
Replaced those two years ago. Tractor is a 1996.....:thumbsup:
 
MOPARMITCH said:
PM'ing my John Deere for the season. Oil change, air filter,spark plugs, grease fittings, sharpen blades, Look at all this crap, stuck under the deck !!!!!
View attachment 1715483209 View attachment 1715483210
Click to expand...
We got a new John Deer today too... note to self, might need a bigger barn

5F777C92-84D2-48E1-BB5C-5ED5918D3A66.jpeg
 
Yeah, our old one was a 1960s first gen for the cab series. This thing is fully loaded but currently doesn’t have auto steer activated
 
Mopar Tim said:
Checking price, dang they depreciate fast!
Click to expand...
Yeah they do. But that’s just because the newer ones are even bigger. You wouldnt believed how little we paid for this one. Less than your crate motor and only has 300 hours on it
 
Mopar Tim said:
So OMR, is again picking up my compressor, seller is flaking out again....talked to seller, seems he broke the pressure valve off, broke off a fitting, was not going to deliver because of it. I told him, I can fix it not a problem!!! :BangHead:
Click to expand...


Sounds like you're getting the run around...

I would cancel the purchase...
 
Tooljunkie said:
Last time i did that, i found all 3 spindles were pooched. Bought 2 new ones and used the best parts left to patch up the 3rd one. Sure cut a lot better after.
Click to expand...
I know mine sure got quiet after changing the spindles. Amazing how bearings with grease in them does that....lol
 
Spend all afternoon on this image and I’m only half way done. Still, it is getting better...and a long way from where I started. Wife wants it to be printed large format so the details are critical so it’s taking a LOT of hard drawing work to make it right.

I have had enough drawing tree branches for one day. Each branch is 4 different colors, each one drawn by hand. Don’t even get me started on how much work the brick details require.

Before

C974BB80-F7E5-4EE3-B3D1-5E030211EAD8.jpeg



Now

D67A2A8E-3059-4351-8B3B-8B0A6507385A.jpeg
 
Last edited:
Recently bought a new refreshment chiller for the garage...its got a glass front and a light that shines all the time. I walked out and thought....this light makes for a cool picture...

20200307_185203.jpg


20200307_185154.jpg


20200307_185217.jpg
 
plymouth67 said:
Recently bought a new refreshment chiller for the garage...its got a glass front and a light that shines all the time. I walked out and thought....this light makes for a cool picture...

View attachment 1715483432

View attachment 1715483433

View attachment 1715483435
Click to expand...
The low resolution of the Forum picture hosting along with it being biased toward dark exposure makes it necessary to brighten every photo about 10% and increase color by about 5% to get it to look here similar to what it does on the original photo.

I applied these rules to your photo...

FDBC9ACB-58B6-43B7-B188-856FD611FBAB.jpeg
 
BIG crowd at Famoso. Probably the biggest I have ever seen there. Not 1 single oil down :eek: we were shocked and pleased. Full fields of TF and FC, most AA/Altereds I've seen in one place in I don't know how long. Good show all the way around. :D
 
You must log in or register to reply here.
-

Back
Top