Thanks for reminding me why I love dusters
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
The shock towers would have to go or at least be notched.Thanks for reminding me why I love dusters
72+ Torinos or 65+ Galaxies will accept them though.
Some days you just can’t win...
Started to take apart the fallen 18’ pine tree today. Since it is only about 8” in diameter at the base, I used a bow saw. Started at the top to lop off the top 6’.
Well, it’s on a steep slope and the ground is saturated from all the rain. I got mostly through it and it started to break and twisted. The ground under my feet slid and as I tried to grab it to stabilize it and wrenched the hell out of my back. I think I slipped a disc in my lower back and now I am in wicked pain. There is no position that makes it stop hurting. I can’t do anything but lay on the floor and try to get it to slip back with stretches and twists.
Muzzerflocker!
This is the same old injury come back to haunt me. It’s been several years since something like this happened and I know I’m in for a week of misery until it corrects itself.
What a fitting end to 2020.
Join the club and see a chiropractor like me...
My kink in my neck is starting to go in the right direction.... I still need some more treatments, but it's getting better a little at a time...
Last edited:
Some days you just can’t win...
Started to take apart the fallen 18’ pine tree today. Since it is only about 8” in diameter at the base, I used a bow saw. Started at the top to lop off the top 6’.
Well, it’s on a steep slope and the ground is saturated from all the rain. I got mostly through it and it started to break and twisted. The ground under my feet slid and as I tried to grab it to stabilize it and wrenched the hell out of my back. I think I slipped a disc in my lower back and now I am in wicked pain. There is no position that makes it stop hurting. I can’t do anything but lay on the floor and try to get it to slip back with stretches and twists.
Muzzerflocker!
This is the same old injury come back to haunt me. It’s been several years since something like this happened and I know I’m in for a week of misery until it corrects itself.
What a fitting end to 2020.
Take care Dave....
I think it would be a TIGHT fit in a Falcon.
Well you can buy swap headers for a Maverick with a 351C. Not sayin it's easy. LOL I also remember Hot Rod mag did an article on how to swap a 428 in a 67 Falcon in the mid 70s. No cuttin, no weldin and all factory Ford parts. It was a complete bolt in.
I'm still here.........
zkx14
Duster De-ruster
Still at work... Done unless they call me for something. Just putting a few things in the computator. Out of here at 1I'm still here.........
Unconventional
Well-Known Member
I'd like to see that. There's a '66 Comet runs around here with an FE of unknown size in it. Builder went the coilover route and removed the shock towers completely. Looks nice and smooth under the hood without them.
I looked and Holley/Flowtech have the headers for the 351W also. Specs on them say C4 auto trans only.
I'm still here.........
You still in coeree-er? Is that like dieree-er? lol
Unconventional
Well-Known Member
The weather geeks got it right for a change. We got rain for the time being and it's not fooling around 
Actually, aint been sick, Food would be just alright, if it was warm when they left it at the door. Been using the elect kettle water in the bathroom sink to warm it EVERY TIME !!!
That sounds like bein in jail, actually. lol You'll bee needin a conjugal visit fore long.
zkx14
Duster De-ruster
We got plenty of that Christmas eve day. Dry now till Thursday we get another round into Friday. No snow in the 2 week forecast...The weather geeks got it right for a change. We got rain for the time being and it's not fooling around
Leg cramps,cant sleep.
Temp is way down,-11f.
Good news is no snow in forecast, but plow truck should be running tomorrow. Im going to see if those headers will fit.
Sitting on shelf doing nothing anyway.
Temp is way down,-11f.
Good news is no snow in forecast, but plow truck should be running tomorrow. Im going to see if those headers will fit.
Sitting on shelf doing nothing anyway.
Ya...Well, I'm makin a break for it on the 2nd....
Morning Insomniacs and Mitch!
Yo Ray
Just received my cold dinner. Heating water in the kettle now...
You need MRE heating packs!
Hey who pays for the accommodations since it is mandatory? Just curious.
They also left my release papers. Thought I couldn't leave until midday 2nd, But looks like I can leave at 6am....
One Guess........
Figures. So you got a get out of jail free pass, what happens next? Ho Chi Min trail? Run forest run before the rules change again.
-
