Stop in for a cup of coffee

[halifaxhops]

EC-130
Lots of interference when they broadcast, big pain in the ***, dam plane had emi seals on everything and a pin hoe in it caused huge problems wit the planes systems.

 

[Unconventional]

Every now and again at the rock farm we would get a trio of all black C 130s haulin' *** up the river bed at like 200' elevation . Just past us was a canyon that ran perpendicular to the river and they always made that turn up the canyon towards the National Forest lands. Many residences along the canyon road. Not a distinguishable marking on any of them. Of course, that part of the forest is or was a very popular area for the growing of large quantities of an unnamed intoxicating herb . " Are those guys scoping out the weed farmers? Or dropping off supplies?"

 

[No name needed]

Has a 10 gauge to the wall about 6' long and wall is wired with 12 ga New 10 Ga plug and wire was stripped back. 90 weight is for compressors, I read it on the internet!

Well if you read it on the net. It must be true.

I am looking at a quart now. 30 weight.

 

[71340Duster]

Wow! Heard of that one now that I think about it but never seen it fire, especially from that perspective!

 

[71340Duster]

The Prowler Retires After 48 Years of Electronic Warfare—And No Combat Losses | airspacemag.com | Air & Space Magazine

I was in a EA-6B squadron, they call the plane the "Chariot of Electronic Armageddon" in this article lol!

 

[MOPARMITCH]

Well if you read it on the net. It must be true.

I am looking at a quart now. 30 weight.

I think most compressors want 30wt non detergent oil.....

 

[dukeboy440]

101 degrees: Check
1/2 mile worth of fence built: check
1.5 acres of grass mowed: check
Two trees cut and hauled off: check

and it’s only 1 pm EST

 

[Unconventional]

Must remember to download and delete some photos of the granbrats on the phone.
Lots of derelicts at the donut shop this morning.
A frequent participant is a '53 Chebbie coupe that is just too bizarre to explain .
Let's start with it's 4wd .
Must get photos.
I swear every time I see it it changes.

 

[No name needed]

I think most compressors want 30wt non detergent oil.....

Agree if lubrication isn't the cause it will become an issue.
My old Sullair 40hp compressor only took 30 wt.
And that was a screw drive water cooled 3 phase machine.

 

[Sublime one]

The Prowler Retires After 48 Years of Electronic Warfare—And No Combat Losses | airspacemag.com | Air & Space Magazine

I was in a EA-6B squadron, they call the plane the "Chariot of Electronic Armageddon" in this article lol!

Have a bunny on the tail did it? They were our close air support, or coordinated it, no matter how you call it they was bad planes. The two seaters were always hanging with us, the four seaters we did not often see. Spent many a mile protecting them while they were on the ground.

 

[Mopar Tim]

I think that motor pulls 23 amps at 110 volts. I ran that set up for years every day. It runs very nice..

 

[Tooljunkie]

A nice little backread. My road trip was successful,not a hiccup.
Small show,50 cars. Lots of people enjoyed the Fargo, asking questions and taking pictures.
One that suprised me was the mustang guy. He came tromping right over and was totally amused with it. His car was a built up v6 supercharged. Was a beautiful car.
Wife doesent like 60 mph in the truck though. Even though im really happy that its not a handful like it was. She never said a word for 35 miles. Seat belts, sway bar and an arm rest for passenger seat next on the agenda.

 

[Tooljunkie]

 

[Tooljunkie]

Anglia with a 340. hes got a 273 2bbl carb to pan for $500. Thinkin….

 

[zkx14]

Fixed my bug zapper that fell a while back when the post rotted. All working except one bulb, but it will work fine with2 or probably even one. Just won’t draw them from so far away. Reconstructed the top with pieces of plastic and Flex tape. Cleaned out the dead bugs that were shorting and smoking. Went and got a new bracket. Finally ready to hang it up. Get to the shed and it start pouring. So I’m waiting here inside the shed door, hoping it lets up soon.

 

[No name needed]

Fixed my bug zapper that fell a while back when the post rotted. All working except one bulb, but it will work fine with2 or probably even one. Just won’t draw them from so far away. Reconstructed the top with pieces of plastic and Flex tape. Cleaned out the dead bugs that were shorting and smoking. Went and got a new bracket. Finally ready to hang it up. Get to the shed and it start pouring. So I’m waiting here inside the shed door, hoping it lets up soon.

View attachment 1715771343

It's only water.

 

[zkx14]

It's only water.

Yep. And I was going to work in it anyway till it really started dumping. Only lasted 10 minutes. Think that might be all we are getting. Zapper is up. Just waiting for it to dry a little and I might go plug it in.

 

[zkx14]

Had surf n turf earlier.
Picked up shrimp fried rice from Giant, and grilled some cheeseburgers. LOL

 

[No name needed]

Today's been fun. Sunday food shopping at Wallymart .
I hate self check out. One open line.
Looked like at least 3 generations, 5 packed carts.
Nice folks saw what I had and let me go in front of them.
Came home unpacked made the usual Sunday breakfast.
Then hit the back with a new machete I bought at Harbour Freight.
Chopped down a bunch of vines and other junk.
Shower, pulled Radiator, fan, pulleys, and water pump of valiant.
Shower.. lunch, painted correct replacement pulleys fan and water pump.
Organized tools. Shower, dinner.
Doing laundry now.

 

[No name needed]

Had surf n turf earlier.
Picked up shrimp fried rice from Giant, and grilled some cheeseburgers. LOL

Where's mine lol

 

[zkx14]

Today's been fun. Sunday food shopping at Wallymart .
I hate self check out. One open line.
Looked like at least 3 generations, 5 packed carts.
Nice folks saw what I had and let me go in front of them.
Came home unpacked made the usual Sunday breakfast.
Then hit the back with a new machete I bought at Harbour Freight.
Chopped down a bunch of vines and other junk.
Shower, pulled Radiator, fan, pulleys, and water pump of valiant.
Shower.. lunch, painted correct replacement pulleys fan and water pump.
Organized tools. Shower, dinner.
Doing laundry now.

According to your schedule, it's about time for another shower.

Where's mine lol

Come on over

 

[Mopar Tim]

Hey guys. Back from golf, Lunch. Did OK, not great.....
Getting more things connected on Engine in Dart....

 

[No name needed]

My new steak knife.

 

[MOPARMITCH]

Today's been fun. Sunday food shopping at Wallymart .
I hate self check out. One open line.
Looked like at least 3 generations, 5 packed carts.
Nice folks saw what I had and let me go in front of them.
Came home unpacked made the usual Sunday breakfast.
Then hit the back with a new machete I bought at Harbour Freight.
Chopped down a bunch of vines and other junk.
Shower, pulled Radiator, fan, pulleys, and water pump of valiant.
Shower.. lunch, painted correct replacement pulleys fan and water pump.
Organized tools. Shower, dinner.
Doing laundry now.

Busy Guy Huh ??????

 

[zkx14]

Today's been fun. Sunday food shopping at Wallymart .
I hate self check out. One open line.
Looked like at least 3 generations, 5 packed carts.
Nice folks saw what I had and let me go in front of them.
Came home unpacked made the usual Sunday breakfast.
Then hit the back with a new machete I bought at Harbour Freight.
Chopped down a bunch of vines and other junk.
Shower, pulled Radiator, fan, pulleys, and water pump of valiant.
Shower.. lunch, painted correct replacement pulleys fan and water pump.
Organized tools. Shower, dinner.
Doing laundry now.

Did you get the bricks done? It's still early.

Raining again. Guess I'm done outside. Maybe time I hit the shower...