Stop in for a cup of coffee

[zkx14]

Looks good from here, kinda like the color also.

I like it too. It's actually similar to, but a little darker than what I used recently in the living room and hallway. And that was not one of the leftovers I mixed to make it. LOL Haven't dicided on a color for the bathroom yet, so maybe... Also might be tearing out the closet and getting or making a smaller linen cabinet to allow room for a stand alone vanity.

 

[WV64Signet]

So, after the fact...

What sort of airflow restriction is there with an unsilnced air cleaner?.

 

[dukeboy440]

So, after the fact...

What sort of airflow restriction is there with an unsilnced air cleaner?.

Lots but for a slant not enough to make a difference

 

[WV64Signet]

Lots but for a slant not enough to make a difference

More wondering about feeding the 4bbl

 

[shittyslant6]

I am finally done with school. After 13 years at the same school; it's over.
To celebrate, today I decided to kill some tire.

 

[Unconventional]

I am finally done with school. After 13 years at the same school; it's over.
To celebrate, today I decided to kill some tire.

High 5

 

[WV64Signet]

I am finally done with school. After 13 years at the same school; it's over.
To celebrate, today I decided to kill some tire.

Congratulations

Can I sign your yearbook?

 

[Unconventional]

Ya know @shittyslant6 Cal Poly San luis Obispo's engineering department has a Tractor Pulling Team. 2 tractors, 1 turbine powered and the other Allison or Rolls Royce V-12 . Should be a good place to go to school and do some hot rodding .

 

[MOPARMITCH]

Air Cleaner.

Stole the 5 1/8" neck out of the Holley 14" air cleaner. Cut the 2" neck out of the original air cleaner and plug welded the 5 1/8" neck in

Shout out to @Old man ray for the inspiration

View attachment 1715940764

View attachment 1715940765

View attachment 1715940766

View attachment 1715940767

View attachment 1715940768

View attachment 1715940769

View attachment 1715940770

View attachment 1715940771

Looks real nice....

 

[MOPARMITCH]

At Cafe Lan for breakfast with my beautiful gal.

 

[WV64Signet]

Looks real nice....

What do you think about air flow restrictions running a 4bbl and cam/bore over stock?

 

[shittyslant6]

Congratulations

Can I sign your yearbook?

yaknow, over half of the signatures were telling me how cool my car was

 

[No name needed]

What do you think about air flow restrictions running a 4bbl and cam/bore over stock?

That's all an engine is , an air pump. The more you can get in the better.

 

[MOPARMITCH]

What do you think about air flow restrictions running a 4bbl and cam/bore over stock?

I would try it as you have it set up now and see how it does. If you don't like it you can always change it

 

[Unconventional]

What do you think about air flow restrictions running a 4bbl and cam/bore over stock?

Did ya seal the new weld joint in the modified base? I only ask because long ago I took the plumbing off the remote mounted air filter on the race Baja and at one of the rubber to tubing joints found a cute little trail of dust heading for the carburetor. Apparently the hose clamp had put a little hitch in the rubber hose that left a tiny passage for the dust to enter on the clean side of the air stream.

 

[WV64Signet]

Did ya seal the new weld joint in the modified base? I only ask because long ago I took the plumbing off the remote mounted air filter on the race Baja and at one of the rubber to tubing joints found a cute little trail of dust heading for the carburetor. Apparently the hose clamp had put a little hitch in the rubber hose that left a tiny passage for the dust to enter on the clean side of the air stream.

Hmm... I had not. Great tip. Thank you

 

[WV64Signet]

14 x 6 aluminum slots

Rubbing against the calipers.....

 

[MOPARMITCH]

You could run a thin spacer and spaced them out a little bit

 

[halifaxhops]

Morning I miss the time change?

 

[MOPARMITCH]

Morning I miss the time change?

I dunno what are you changing at this time????????

 

[MOPARMITCH]

14 x 6 aluminum slots

Rubbing against the calipers.....



View attachment 1715940835

View attachment 1715940836

View attachment 1715940837

Also check those clips that you have attaching the calipers. I believe they are on backwards. Check your service manual

 

[halifaxhops]

Yes they are!

 

[halifaxhops]

See I look back!

 

[MOPARMITCH]

See I look back!

Yeah I was figuring at least you looked at the page that was still on when you posted for the first time in the morning

 

[MOPARMITCH]

Did you see my go to breakfast picture ?????