Are you using 73 and up discs? If so, that requires 15 inch rims
I bought an aftermarket kit and paid several hundred extra for it to fit 14" wheels...
Are you using 73 and up discs? If so, that requires 15 inch rims
I bought an aftermarket kit and paid several hundred extra for it to fit 14" wheels...
marketed as "fitting" they should at least fit the steelies.
I can see the slots being an issue due to the casting in the interference area being a little thicker that the steelies are in that same area. But if marketed as "fitting" they should at least fit the steelies.
My guess they sent the wrong kit.
Just do a little grinding. there is lots of meat there to remove....LoL
AYE!!
Even without the clips on the caliper is up against the rim. (This is the aluminum slot)
View attachment 1715940887
Where’d you order fromI bought an aftermarket kit and paid several hundred extra for it to fit 14" wheels...
The Discs I had on the dart wouldn’t clear my factory 14s either. I swapped from a 73 duster, mine hit the the lip by the ball joint on the upperWhy? My 75 is factory disk and 14s…
Where’d you order from
SIngle piston calipers? They are big. New style wheels are needed to clear.
My guess they sent the wrong kit.
That was a while ago, Ray. Im glad you are helping these beautiful animals. We still have fox around here, havent seen it for a couple weeks. Did have a woodchuck wander into my quonset, i was on the phone, talking to a customer when i started yelling at it to stay out.customer was laughing his *** off! I opened the door this morning, if it didnt leave yesterday, it will leave today.Just want to thank you for the advice on the Mange Meds for the fox.
Seems to have cleared up.
Total of 6 running around.
2 adults, at first I thought 3 pups, they grow fast. Then Friday I looked and saw what I'm guessing was the mother with one about the size of a very small dog.
I pointed it out to someone. Wrong move. I'm still walking funny, and sleeping with one eye open.
They like oatmeal and carrots.That was a while ago, Ray. Im glad you are helping these beautiful animals. We still have fox around here, havent seen it for a couple weeks. Did have a woodchuck wander into my quonset, i was on the phone, talking to a customer when i started yelling at it to stay out.customer was laughing his *** off! I opened the door this morning, if it didnt leave yesterday, it will leave today.
There is somewhere in my family archives a photo of Neil Young pushing my sister on a swing in our back yard. He was good friends with my uncle Leonard. Would be near 60 years ago.Here's the latest adds to my vinyl collection, got these yesterday. The Neil Young is a 1968 album, don't think I've seen it before. The Smith record is one that my parents used to have and even though I have most of their records this one wasn't in them so I took a flyer not knowing if I'd like, knew every song lol! And The Who, this one has Eminence Front on it.
View attachment 1715940929
Good point!Just a silly thought. Are the pads pressed tight against the rotor? Have you bled them yet? That may be the tiny bit of clearance you need? Just thinking out loud...
My 76 tooWhy? My 75 is factory disk and 14s…
@65 Dartman was using the wheel as a garage roller for painting...
14" SBP soooo...??? Unsure of the age
they were 14 in SBP steelies and I no longer have them. The wagon now sits on 14 in Magnum 500’s with new tires as a roller
Chris, do yourself a favor, just grind it down till it clears. Wont hurt anything. Unless were talking 1/2 an inch!!!
Do you recall what year the steelies were Don?