Stop in for a cup of coffee

-
Stephen Hotz said:
There are 3 of us they have done or are doing this to right now, Bare Rose Garage had the same problem at 452 subs and another channel is having the same trouble at 552 subs something about the 2
Click to expand...
Found the interview. I thought its was on Freakonomics but it's with Dave Davies who also is pretty good, unlike Freshair's main host who makes me nautious.

edit: I didn't know the link would embedd an audio.
If you click on the title, you can read the transcript.
 
Last edited:
71GSSDemon said:
Good morning everyone. Is there a large number of people getting sick near you guys...any/all of you? Seems like most people I know is. All testing too and negative. Just allergies?? Very strange for September here
Click to expand...
A few of folks I know had some sort of stomach bug.
Not that unusual. Especially with kids back in school.
I've had a case of shingles - pretty much can only catch that from yourself. :rolleyes:
 
Mattax said:
A few of folks I know had some sort of stomach bug.
Not that unusual. Especially with kids back in school.
I've had a case of shingles - pretty much can only catch that from yourself. :rolleyes:
Click to expand...
So stop keeping in touch with yourself silly!
 
Tooljunkie said:
Harvest here, lots of fluff in the air,as well as smoke from forest fires. Couple days and its going to start raining.
Click to expand...

I wondered about the fields being cut there causing some crazy allergy things. Up until this last weekend, it has been very dry also. Maybe....
 
I hear chainsaw and what sounds like lumber (2 x 4 ) dropping.
Sure'nuf some braineiac is demolishing a 2nd story deck with a chainsaw.
Good thing its not too close - I dont want to see the result when he hits a deck screw or bolt.
 
Mattax said:
So what I learned today is I can probably tap out the oil pan's drain plug to 14 x 1.25 but there are no 14 mm taps in the garage, although I did find a 9/16-18.
I think either is a better route than the oversized drain plugs - and yes I'm still trying to avoid removing the pan - this is just the first time I've got back under the wagon for a few weeks.

After I got home did some web searching and 14 x 1.25 was only used for a few applications but is available.
So looks like I'll have to order taps and the drain plug. In the meantime I'll remove the rocker covers .
Click to expand...
Hey Matt. I think a 14 mm plug thread chaser may fit your need. Plenty of those around. Just dealt with blown out plugs in a Furd 5.4.
 
Good Morning All! Been off work all week per their Covid protocol, wife getting through it, I've tested negative 4 days straight, testing again this a.m.
 
MOPARMITCH said:
Hey Matt. I think a 14 mm plug thread chaser may fit your need. Plenty of those around. Just dealt with blown out plugs in a Furd 5.4.
Click to expand...
Yup, helicoil makes a kit. Then put th sleeve in and screw in a spark plug! :lol:
 
MOPARMITCH said:
Hey Matt. I think a 14 mm plug thread chaser may fit your need. Plenty of those around. Just dealt with blown out plugs in a Furd 5.4.
Click to expand...
That's what got me going down the 14 x 1.25 path. I figured there must be a spark plug tap or chaser in the toolbox left by the landlord, but there wasn't. But I do like the idea that it's almost the same thread pitch as 1/2-20 so sort of like oversizingwhat's already there.
 
71GSSDemon said:
Good morning everyone. Is there a large number of people getting sick near you guys...any/all of you? Seems like most people I know is. All testing too and negative. Just allergies?? Very strange for September here
Click to expand...


I've been staying in mostly for the last three weeks... I have no idea...
 
krazykuda said:
I've been staying in mostly for the last three weeks... I have no idea...
Click to expand...
Same here, just doctor visits wearing a mask at all times as I get out of the truck, memike is to dang silly/mean/ugly to get sick.
 
You must log in or register to reply here.
-

Back
Top