Location is different. Yes
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Location is different. Yes
5 of them but this one will be sold to a couple in Stockholm.
Morning!
A balmy minus 7 celcius this morning. Not good for anyone that left garden hoses outside, will crack fittings. And split pressure washer housings.
Back to patch panels on the ford edge.
A balmy minus 7 celcius this morning. Not good for anyone that left garden hoses outside, will crack fittings. And split pressure washer housings.
Back to patch panels on the ford edge.
dukeboy440
Well-Known Member
Actually, I almost wonder if you have found a slant 6 727… that would account for the differences as well.
or you’ve found the rarer slant 6 727 pushbutton. That would account for the differences as wellFeel your pain Chris ( @dukeboy_318 )
Pulled the old transmission out of the car. The new one is NOT a 904...or at least it appears that the tailshaft housing is not. ID number on the transmission is a 65 Slant 6 HD Valiant and the housing accepts the pushbutton but it is several inches longer
So I'm a dolt for not recognizing that but everything from the bell housing back to that point is totally correct.
View attachment 1715999145
View attachment 1715999146
View attachment 1715999147
View attachment 1715999148
View attachment 1715999149
View attachment 1715999150
HankRearden
Well-Known Member
I'm afraid to go look at the dart this morning. I painted the one side of it yesterday but the temperature dropped like a stone as the sun set and as it dropped the orange peel just got worse with every coat. Not to mention the bugs landing on my paint.
Anyone have a tutorial on how to cut and buff?
Anyone have a tutorial on how to cut and buff?
dukeboy440
Well-Known Member
YouTube: Eastwood channel
dukeboy440
Well-Known Member
Pretty accurate these days
zkx14
Duster De-ruster
Cruising out… Good Morning
zkx14
Duster De-ruster
…
- Joined
- Mar 17, 2018
- Messages
- 14,797
- Reaction score
- 34,570
Looks like you boys are gonna have a great day of fishing! I am pouring the patio today. Actually they are going to stamp it so that it looks like wood. I have never seen it that way but Boss has and she likes it so that is the way it is gonna be. They dye and stamp. I did get almost all the bar wiring done yesterday. I left the three overhead lights alone as I am not sure what kind of light she will decide. And I attached the best tool ever for residential electrical. Man it is handy!
- Joined
- Mar 17, 2018
- Messages
- 14,797
- Reaction score
- 34,570
Let me make sure I understand, what you are essentially saying is that you are getting to much tail and your not happy About it?Feel your pain Chris ( @dukeboy_318 )
Pulled the old transmission out of the car. The new one is NOT a 904...or at least it appears that the tailshaft housing is not. ID number on the transmission is a 65 Slant 6 HD Valiant and the housing accepts the pushbutton but it is several inches longer
So I'm a dolt for not recognizing that but everything from the bell housing back to that point is totally correct.
View attachment 1715999145
View attachment 1715999146
View attachment 1715999147
View attachment 1715999148
View attachment 1715999149
View attachment 1715999150
Good Morning All!
- Joined
- Mar 17, 2018
- Messages
- 14,797
- Reaction score
- 34,570
You are up early! I am trying to remember the big festival in Anacortes that happens about now Oyster run or something like that. It was always a hoot. We would stay over in LaConner Upstairs over a bar in a little itty bitty room and just watch the canal Do it’s thing.
Yep that was the Oyster Run, happened a couple weeks ago. My daughter works in Anacortes at a Spa, they just close for the day, can't understand it but some people who get massages don't want to hear Harley's lol! It's a pretty big run and yes LaConner would be a great venue with their main street etc.
Karl????
And my shaft is too long. Exactly
My buddy the machinist has shortened driveshafts for me a few times. His lathe is big enough to accept them. Machines end off, cuts to length and drives yoke back in. Uses bars through the yokes to align and square end and welds it up. May attempt it myself next time.
And my shaft is too long. Exactly
Good morning men, wait !! Did I see someone is pouring concrete today !!
Its going to freeze tonight I think
If it freezes the top will last about a year and pop off I believe!!
Its going to freeze tonight I think
If it freezes the top will last about a year and pop off I believe!!
The ID number comes up as 225 904 HD Valiant Dart
Not in Johns neck of the woods. No frost there im sure.Good morning men, wait !! Did I see someone is pouring concrete today !!
Its going to freeze tonight I think
If it freezes the top will last about a year and pop off I believe!!
Up here? Forget it. Has to be covered.
Oh no, I hope I am wrong but is it going to freeze this evening up there my friend? Don't let it freeze or the top will indeed pop off by this time next year .
Our weather man is saying freezing here tonight, a record braking cold shot for us.. let me look, yes, it will fut up the top cap, it will pop off
dukeboy440
Well-Known Member
Interesting indeed
I am northeast Arkansas, concrete pour is in northwest Arkansas where its even colder.
Shoot, I didn't get my camera centered 
-
