Stop in for a cup of coffee

-
RustyRatRod said:
Mornin! Twat you got planned for your time at home? Goin to drag more cars out?
Click to expand...
Not this time. I swapped out a starter and battery on the 03 Mustang DD. Need to do a couple more videos on the Satellite and Valient. But we will see whats going to happen.
 
MOPARMITCH said:
After dinner tonight went to shoot some pool.
View attachment 1716049767

View attachment 1716049768
Click to expand...
Nothing sexier then a lady with a pool stick in her hands around a pool table, enjoy life like you mean it you two !!

imagejpeg_0(1).jpg
 
Stephen Hotz said:
Not this time. I swapped out a starter and battery on the 03 Mustang DD. Need to do a couple more videos on the Satellite and Valient. But we will see whats going to happen.
Click to expand...
Where do I go to watch them Stephen ?
 
A couple hours knocking down paint and feathering all the scrapes and chips. A little more to go. Top layer and primer below it peel off like nothing. So i will leave whatever original paint is still holding well. I see no point taking it all down to bare metal.

B5127CCE-DFDB-4395-99E9-2253F5B04A04.jpeg
 
Sublime one said:
Pouring down rain here so I figured I would pour a toddy and go to gun shop and clean. It looks like a squatter has been in there! What are we pouring this afternoon TMM? I think I am going EC small batch!
Click to expand...
I was downstairs messing around and poured a couple finished Starlight samples, one finished in VDN barrels and one in Cognac. It's a toss up. I might have to sample again to be sure! :rofl:

source.gif
 
toolmanmike said:
I was downstairs messing around and poured a couple finished Starlight samples, one finished in VDN barrels and one in Cognac. It's a toss up. I might have to sample again to be sure! :rofl:

View attachment 1716049850
Click to expand...
Clearly you have no choice but to sample again. To keep the test control scientific you need to sample in reverse order. In this way each one has a fair shot at first on the pallet. Then in order to be completely objective you need to pour a third evolution to confirm the findings! Just trying to help Boss!
 
Sublime one said:
Clearly you have no choice but to sample again. To keep the test control scientific you need to sample in reverse order. In this way each one has a fair shot at first on the pallet. Then in order to be completely objective you need to pour a third evolution to confirm the findings! Just trying to help Boss!
Click to expand...
Thanks, I knew I could count on you! :poke: :rofl: Speaking of EC, I am fixing up a couple samples for Travis that he was interested in. Sample for Travis, sample for Mike. Rinse and repeat.
 
Tooljunkie said:
A couple hours knocking down paint and feathering all the scrapes and chips. A little more to go. Top layer and primer below it peel off like nothing. So i will leave whatever original paint is still holding well. I see no point taking it all down to bare metal.

View attachment 1716049840
Click to expand...
Good move, I always try and let good paint stay like that, fog the first coat of primer on and let it get good and tacky was my practice back in the day on bar metal
 
toolmanmike said:
I noticed the tailgate open on my truck. Somebody took the tailgate protector off. Frickin thieves. I need to get my Ring doorbell installed. Bastards!
Click to expand...
Sorry to hear that Mike I think I'm gonna do what Ray told me and hook a coil to the body on my truck.
 
You must log in or register to reply here.
-

Back
Top