Stop in for a cup of coffee

[memike]

I am so happy I made northeast Arkansas my home, I could not stand staying in a winter weather pattern for 5 to 6 months, just looking at something good about this Friggin Freezing weather this morning.
The look down my driveway, see that mail box in the second picture? Yep, a beuity ain't it .

 

[WV64Signet]

Morning Scott just around the same temp here.

10° here. Wind chill of 1°

Above zero at least

Morning

 

[halifaxhops]

Morning Willie

 

[dartnabout]

Good Morning my Frigid friends

 

[halifaxhops]

HTF did this happen?

Distributor stuck

Could anyone give me some ideas how to get a distributor out of a slant six that the big part is broke off the smaller part and 1/4 inch of smaller part is sticking above block center shaft is still in smaller part and bigger part of distributor body

www.forcbodiesonly.com

 

[halifaxhops]

Good Morning my Frigid friends

Santa!

 

[memike]

HTF did this happen?

http://[URL]https://www.forcbodiesonly.com/mopar-forum/threads/distributor-stuck.82106/

[/URL]

Maybe someone got in a hurry and chained the slant to pull it, or couldn't move the dizzy easily and used a bf hammer to pek it loose..

 

[halifaxhops]

Weird one there. bet he used a round o ring on the shaft instead of a flat one,

 

[dartnabout]

Cold out there

 

[dartnabout]

I'm wondering how you would get it out

 

[halifaxhops]

Thinking slide hammer with A screw or hook end. Might have to do it twice, the lower bushing might come out first.

 

[WV64Signet]

Maybe someone got in a hurry and chained the slant to pull it, or couldn't move the dizzy easily and used a bf hammer to pek it loose..

They want to roll to that side so, yeah. . It flipped when pulled or fell to that side after it was out of the car.

 

[halifaxhops]

better yet a bearing puller,

https://orionmotortech.com/cdn/shop/products/16pcBlindHoleColletBearingRaceandSealPullerExtractorToolKit.jpg?v=1621488253&width=550

 

[dartnabout]

I don't know but sounds like things I get myself into

 

[WV64Signet]

I don't know but sounds like things I get myself into

I definitely empathize with his challenge

 

[halifaxhops]

II have never seen them stuck that badly. doubt it was out of the car?

 

[halifaxhops]

just thought of this cannot use a slide hammer has a gear on the end if the shaft,

 

[dartnabout]

As long as you allowed it to twist as it came up and out

 

[WV64Signet]

just thought of this cannot use a slide hammer has a gear on the end if the shaft,

Pull the pan and go in from the bottom? (Queue Karl)

 

[dartnabout]

I know what I would do....scrap it and go big block

 

[halifaxhops]

He will have fun. No room in there for say a pipe wrench.

 

[dartnabout]

gotta go

 

[WV64Signet]

I know what I would do....scrap it and go big block

Or 273.... no wait 318.....

 

[WV64Signet]

gotta go

Be safe out there.. wear a hat

 

[WV64Signet]

He will have fun. No room in there for say a pipe wrench.

No room in the car for anything on that side