Mr. Sinister
Devastation Manager
Tell me what I have.
And I bet you are here all week right?A 9103S Carter Thermoquad Carburetor.....
Sorry. Had to....
Model #- year-engine-trans-“F” FederalView attachment 1716068280
Tell me what I have.
9103 | 77 400 HP AT F (4027761) | 4098 | 5143 | 2211 | 1-1/2 | 2 |
Where would the vacuum port be located?I thought the 9103 was a Lean Burn carb, it doesn't have the port for the distributor vacuum advance.
But where would it be on a non lean burn carb?On leanburn set ups, the distributors vacuum port is located on the computer mounted on the air cleaner.
Adding one to the carb is doing a copy cat to the earlier OEM carb.
There’s no vacuum port for the distributor on the carb.But where would it be on a non lean burn carb?
In 1977, that would be the case.
A vacuum port for the distributor can be installed. You’ll just need the fitting, OEM or home made & a drill bit properly sized for your fitting. Something like Indian head gasket shellac can be used to seal the fitting if need be.