Tr6060 to 440

-
dodgedifferent2

dodgedifferent2

Well-Known Member
Joined
Aug 8, 2008
Messages
3,142
Reaction score
1,005
Location
southwestern, Ontario
I have been reading but have not found anything yet.

I picked up a tr6060 from an '11 srt challenger and planned to mount to a 400 stroker

What part number for quicktime do I use for the tr6060? Or who else makes an adapter?

RM 8073 says for big block to t56 but does not work with the tr6060.

Can I make it work? Anybody been on that road yet?
 
dodgedifferent2 said:
I have been reading but have not found anything yet.

I picked up a tr6060 from an '11 srt challenger and planned to mount to a 400 stroker

What part number for quicktime do I use for the tr6060? Or who else makes an adapter?

RM 8073 says for big block to t56 but does not work with the tr6060.

Can I make it work? Anybody been on that road yet?
Click to expand...
 
dodgedifferent2 said:
My trans is trapped on the opposite side of the can/us border, but i have suspicions its the same as an ls
Click to expand...

I have the BBM to T-56 scattershield in my storage shed -

The T-56 / TR-6060 should have the same bolt pattern to physically bolt up the the same bellhousing... the issue is that various T-56 and TR-6060s have different input shaft lengths... I couldn't find any specs on the Dodge TR input shaft length - but the that is probably why they list the 8073 as not working with the TR-6060...

I actually have a Viper spec T-56 for my Charger and the input is longer than the GM and Ford input shafts so I had an adapter plate made that mounts between the bellhousing and the trans to adapt the bolt pattern and take up the space.
 
You must log in or register to reply here.
-

Back
Top