my68barracuda
Well-Known Member
I am considering adding V Band Clamps to an existing exhaust system, to make disassembly easier for engine pulls.
I bought a set of Summit V Band clamps and noticed that the depth of the diameter for the exhaust to print into is only about 1/8 of an inch.
For ease of installing, less critical on the straightness of the exhaust pipe cut and length I was hoping for more.
Is that print depth standard across other V Band clamps?
I bought a set of Summit V Band clamps and noticed that the depth of the diameter for the exhaust to print into is only about 1/8 of an inch.
For ease of installing, less critical on the straightness of the exhaust pipe cut and length I was hoping for more.
Is that print depth standard across other V Band clamps?