You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
I have just finished repairing / rebuilding a Vacuum Heater Control Switch from my friends 1964 Plymouth Fury.
I thought I would share my How To...
-
Ok, so here it is. I've seen it asked a bunch, I've heard of a few folks that have done it, but here it is. How to convert a standard Duster over...
-
Im gonna show you how to modify your auto on the column steering collars to convert to an auto on the floor or 4 speed column. I got these pieces...
-
This is a how to on reconditioning a cone style sure grip unit. This is not a boni-fide approved repair in any book or manual. I have done a LOT...
-
Inkjunkie:
At least I think that is what it was called. It was an article written by Andy F. I believe. Was on the AREngineering site, but my...
-
I'm so sick of buying those moving dollies and them breaking when I put an engine on them, even the ones rated for 1000 lb. Hell, I could build a...
-
Ok, some discussion about the Plymouth Barracuda emblems has had me thinking and I had to look for more info. Seems a lot of people think the...
-
Have a thirty year plus collection of paperwork in a binder with information that I deemed important that was gleaned from all kinds of sources...
-
Ok, so this is for a floor shift column. It can be a formerly column shifted car, but the outer shifting tube has to be removed for this to work...
-
I am creating this thread for people who need help when it comes to removing/installing their early a-body 61-66 standard 2-spoke steering wheel...
-
The heater motor is actually a Stock Motor that I have recessed into a modified heater box housing.
Here are the steps to do the heater box...
-
i have been working on the repair of my sharktooth grille over the last couple of months and I have made some progress that can be shared for...
-
Sounds like fun right? Well, doing some work at home can really save you some money on your project. And we all like that. I recently did this job...
-
Much like that POS axle width chart that's floated around moparland for years, the original list posted in the tech archives was FLAT WRONG for...
-
I thought with the many questions I see on this forum about codes I would submit thirty years of info that I have scribbled down in a few books...
-
I have a Champion 4 core 228221; radiator that has performed well in my new 416 stroker small block. I've put 3458 miles on the motor in 1 ½ years...
-
Been working on a Classic Auto Air install in my 340 Demon for about a month now. It's way too hot here to drive these cars this time of year, so...
-
This will be a sticky and be locked when done. Please begin another thread for comments. Thanks.
I am building this 850 Thermoquad for Jeremy...
