You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
I have installed many sets of TTI LONG TUBE headers but this is the first time installing their shorty set. Along with the Shorty's a complete TTI...
-
So you bought some old crusty steel wheels and want a quick way to remove all that nasty rust?
Get yourself 2 gallons of good 'ol cheap pool acid...
-
Take 2 empty 5 gals buckets and one cover. cut the bottom of one of the bottoms minus 1/2"-3/4" to leave as a small lip place one bucket with...
-
Hi all, thought I would share with you the installation of my new seat covers. I purchased them from Legendary.
I took the old covers off but...
-
Just thought I'd share a quick tip as I'm doing my wiper seals on one of my Dusters.
-
Start by sawing it lengthwise as far down as you can go.
Bust off half with a chisel.
This one's almost off. The other side is next...
-
Learn how to paint your wheels on your car properly so it looks amazing and lasts a long time!
This video goes though the 5 main steps to paint...
-
I found a smaller motor that is a bolt in replacement for the stock motor. AH451 New Universal Products 12V
Easy one to do the pics explain it...
-
New package trays appear to go for $40 to $100, possibly cheaper on eBay. It's not a lot, but you can easily build one yourself for less. This is...
-
So you've made the decision to upgrade your factory ignition, and you're holding a shiny new distributor from BluePrint Engines in your hands :) ...
-
Learn How to Solder Correctly. In this video I show you the tools, tips, tricks, and techniques to properly solder, from what type of solder and...
-
(Outside) Learn how to get your windshield super clean! The windows of your car or truck are what you look out of and it is important that they...
-
It takes more than a powerful alternator, and more than changing to powerful replacement headlights, to get brighter headlights on these older...
-
Traction devices have been around for years. Perhaps the best known are the classic "traction bars" that bolt to the bottom of the springs and /...
-
-
gwmax65
-
Updated
-
103 min read
-
5.00 star(s)
-
Views:
81K
-
Reaction score:
19
Hello! This is gwmax65 here. I am going to go in depth and detail on how I did my first Magnum Swap into my brother's 1965 Plymouth Valiant 200...
-
Ok there have been a few posts asking about this lately. If you don't use the proper bracket for the Mopar, and just the universal one that comes...
-
Part#/Stamp# Year-Yr Body Speed Remarks
2525629 1964-66 A VARIABLE
2525270 1964-65 B SINGLE
2580915 1967 B VARIABLE
2584975 1965 C VARIABLE...
-
This list was taken from the Classic Industries catalog. It's a good one to save to your Mopar Docs folder :).
Regards,
Mr G.
