Recent content by Div6

  1. Div6

    69 Cuda Convertable Twin Peaks

    It has been decided to another Twin Peaks series so I thought I'd throw some fun stuff about the 1969 Plymouth Barracuda used in the show. Dana Ashbrook/Bobby got to blast around in the mean sounding Cuda. This car had a 318 2 barrel carb with single exhaust, they did a good job with the...
  2. Div6

    Thanks for comments....Looking at the E.T. on my window at the drag races reminds me of things...

    Thanks for comments....Looking at the E.T. on my window at the drag races reminds me of things that needed changing in order to run 12:50s on the basic truck motor. 3 pulls on the dyno with a tune on the Diablo. The big kicker was cutting 2 holes in the hood. 1 hole is plumbed to the throttle...
    • Div6
    • Profile post
  3. Div6

    Duster Floor Pan Seat Hole Location

    Hi Does anyone have the dimension of the holes fore and aft, inboard and outboard with relation to where the bucket seats would mount? I have a 1972 Plymouth Duster. Cannot get these dimension due to my current deployment location. Thanks
  4. Div6

    5.7 Hemi Racers

    The sensor is in the front of the airbox Time to relocate Thanks
  5. Div6

    5.7 Hemi Racers

    You understand exactley what is going on.
  6. Div6

    5.7 Hemi Racers

    I have a stock 2004 5.7 Hemi "TTI headers" from a RAM 1500 in my 72 Duster I use for bracket racing. Over the years I have had some success racing a carb car and was conned into EFI Hemi. This was a complete transplant, new wire harness, ECM fly by wire pedal, etc. The problem I have is the...
  7. Div6

    Speed O Cable Length

    Hi Does any one know how long the speed o cable is for a 72 Duster with an automatic? Thanks
  8. Div6

    1972 Ply Duster

    Does anyone know if the A pillar molding for the 73 Duster will fit my 72?
  9. Div6

    Tubular upper control arms

    I have the Control Freaks front end tube K member with tube uppers and lowers. I drive the car to the track for bracket racing and drive home with no issues. I have a extra Control Freaks K member with motor mounts for $500. This was purchased for my 72 Duster running a 5.7 Hemi
  10. Div6

    TTI headers in right hand drive abody

    Opps that's Sam Davis at TTI
  11. Div6

    TTI headers in right hand drive abody

    Sam Atkins is the TTI tech....He is very informative
  12. 1972 Plymouth Duster 5.7 Hemi Keisler 4 Speed Automatic

    1972 Plymouth Duster 5.7 Hemi Keisler 4 Speed Automatic

    This is 27K original miles Duster. We put a 5.7 Hemi out of a 2004 Dodge Ram that had 850 miles on it. It has the Keisler 4 Speed Auto, 3.91 Sure Grip, TTI headers,Flow Masters and 2 inch dropped spindles. Power 4 wheel disc brakes with the Flaming River steering box. We painted it the 2007...
  13. Div6

    Identify this Overdrive trans.

    Hi I have the Keisler 4 speed automatic in my 72 Duster behind a 5.7 Hemi. They use the 4L60 tranny. We had to trim a piece out of the torsion bar crossmember at the hump area.
  14. Div6

    Keisler auto/overdrive Trans. Price? Quality?

    Hi I have the Keisler 4 speed auto in my car. Had I know all the difficulties I would have use the Gearvendors unit..I paid 3400 for the unit. It's behind a 5.7 Hemi in a 72 Duster
See more
Back
Top