I need a reliable source for a bolt in source for the crossover tubes on my kelsey hayes front disc brakes, 70 Dart any help would be greatly appreciated
That's good to know as a I want the best when it comes to braking and don't mind spending xtra on steering and braking, how dd your valve installation work out. Thanks for the heads up on the price, I had done some preliminary price checking and was only down to $43.
ok. the 7/8 D100 rear wheel cylinders should cease the famous lock up, the 15/16 with the rest of the stock set up except the valves should provide some travel but not minimal travel and not a hard pedal like the 1 1/18...
what about the pads, should I get the most heavy duty with the...
I am going to adapt a late model aluminum m/c to my 70 Dart, Can I safely eliminate the prop valve all together by putting adjustable pressure valves on the front AND rear line. Stock KH front discs and stock rear drums for 8 3/4. I plan on using one that has a 1 1/8 bore and putting 7/8 bore...
Hey John I did an 7 1/4 to 8 3/4 swap and used all the brake lines off the 7 1/4 on the 8 3/4. The rearends were the same years and both out of a Dart.
You may have a different setup???
70 Dart with factory kelsey hayes 4 piston disc front, rear 10 x 1/34 drums.
The wife won't drive it unless it has power brakes .
I'm guessing I need the following:
power brake booster
correct pushrod
correct master cylinder
what else do I need?
can I keep the original proportioning...
Trying to gauge interest in a rare set up. I found a 73 swinger with the front disc set is small bolt pattern with the later model large single piston caliper. I thought maybe it was something that someone had rigged but did some research and found out that a few 73's came from the factory with...
340 butterduster asked about them but I'm afraid he will find the shipping from Fl to Canada too high, anyone else want to get in line??? These are in good shape, I priced them to move quickly as I need the cash yesterday.LOL.
Complete 10 inch 1 3/4 rear drum set up for 7 1/4. Drumsnot pictured, the camera puked, ready to go do not need cutting. Came off a running car. Only difference between this setup and 8 3/4 10 inch set up is that there are only 4 plate mounting holes instead of the 5 on an 8 3/4. 70 bucks plus...
motor city supercars, they are the ones that if you search "mopar brake lines" in ebay, it is the listings where they have prebent brake lines for the master cyl to the proportioning valve for $18, The quality was excellent and they fit perfectly
I know where there is a 73 small bolt pattern with the 73 up larger ball joint/ spindles with the single piston caliper that swing69 spoke of if anyone is interested. Not trying to hijack the thread. It will allow sbp wheels with the advantage of 73 and up single piston caliper and larger ball...