Search results for query: *

SOCIAL MEDIA. YouTube, instagram, tiktok etc. I have no idea what each team makes, but there are car personalities on there make 6 figures a month off SM. Do a little research on the YouTube algorithms and you’ll see, it’s crazy.

Don what’s the VIN and license plate. I’ll have wife post it on Facebook. Unreal the views crap gets on there. She knows a lot of people in Battle Creek and Kalamazoo, maybe it’ll help. That being said, I’m in Kalamazoo off D Ave. I have a very nice 20’ dovetail ATC trailer only couple...

They flat out don't respect those cars. They can say what they want in the intro's and what not but their actions and behaviors around you just show they don't respect what they can do. But its their money and their business, plus I'm sure a wrecked car video gets more "hits" than a clean pass.

I thought you meant the big hole 3/4 the way up. Theres a 1/2” pipe plug in the bottom to drain. Around that is a piece of 1-1/2 moly so you don’t jack right on the plug, you can also mount wishbone off the other side.

Oil fill/inspection. It gets a threaded cap with o ring.

FWIW- I changed to a 9” a couple years ago. I run low 9’s with a 4 speed and basically what you describe. I usually run 4.88 to 5.13 ratio and in a Dana when I broke a set after 12 years in 2016 it was a 6 mo wait for pro gears. I tried a set of street gears that lasted 6 passes. I eventually...

Sold. Thanks FABO!

2.5” X-pipe system. Pypes stainless steel mufflers. Came off sb with Dougs headers. Dumps just before axle. Sounds good. Mufflers clamp on, rest of system welded. Plenty of ground clearance. $200. Prefer not to ship. SW Michigan Thanks FABO.

Strange S-60 housing. A body width. New 35 spline axles, spool, bearings. Billet housing ends. Green bearings. 1350 Strange yoke. Moser aluminum girdle. 4:10 gears. Perches welded for inboard spring a body. Everything new but the housing. 1600. Buyer arranged shipping. I’ll pallet. Thanks...

1700. Thanks

Strange Dana 60. A body width. Spring perches for inboard springs. New 4.10 gears, new spool, new 35 spline axles 5x4.5” pattern and 3” screw in studs, all new bearings and 1350 forged yoke. New Moser aluminum cover/brace. This is the Strange housing without pinion snubber. $1800 obo May...

Do they use standard rocker gear? And probably normal la pattern valve covers not the magnum. Thx

Yep! There’s usually an A100 there but I think he’s a conventional 4 speed now. A couple of early A’s. 1 time trial Friday then usually a gamblers, 2 time trials Saturday then eliminations. Just a heads up-PA system there kinda sucks so listen close or bring a radio with you.

Meet track/nhra requirement for et/safety. No hydraulic release or air shifters. Must leave and shift as direct action of the driver. Typical handicap race. Also a factory (3,4,5,6 speed) trans gets you a $100 bill if you get to the finals. Usually a good mix with new challengers...

Aug 10, 2019 Stickshift Challenge at the Mopar Nats. Brewers Performance will be on board again this year with checks to winner/ru of 500/250 respectively bringing total purse to: Winner $1500 Runner Up $650 Semis $100 They’ll be a custom made trophy and free shirts to participants like years...

Not sure what it weighs. I’ve built a lot of Dana’s over the years and I’d bet 10-15 or so lighter just from tossing it around. Took for maiden voyage. Clutch needed a bit of adjustment and carb must have done crap in it. Want to load up and run a little rough so going to have to straighten...

Correct it is a 9”. Not a single factory piece in it so we can call it whatever.lol Got housing back, and assembly back under the car. Had some wiring to straighten out in the trunk. Axles also came in from Dr.Diff. The Steelers are on and they just clear the Right Stuff disc conversion...

Pic of the car as well.

Trans is finished and bolted up, same with shifter linkage. All the powder coated pieces are done as well. Still waiting on axles from Dr. Diff but getting closer. Z-bar linkage is a pain. I'm using Dougs headers and it hits right in the middle of the tube. I think the tti modified would...

Tires are Nitto NT555R. They're on new 15x10 steel wheels, wheel vintique, and essentially dictated rear end width. I just finished painting the wheels body color the other day, waiting for the fronts to come in. As you can see on the 8-4/4, I had to notch the back brace to clear the shocks...

There's a local Mopar race at US131 on Sept 9, so my goal is to have it rolling by then. I had a Dana 60 housing laying around, but I decent to put a "8-4/4" in it. I built the housing a while back for someone else, but they changed wheel combo mid way so ended up too short and I've been...

Took better part of a day cleaning the entire underside of the car. I previously put frame ties in for the previous owner. Once clean the bottom was epoxy primed and then painted. I think I'll put some undercoating in a couple spots. Goal of the car is street/strip but more street. Right...

I bought a set of amd repop inner wheel houses, then widened about 2.5" to take to the frame rail. Nasty cutting out all the old crap and bad welding. Once everything was welded up I seem sealed in many of factory locations. To fix that stupi spare tire section bought a new trunk pan. I...

Finally getting a little closer, should have been done months ago. Ditched the 727, 8-3/4 combo for a QuickTime scatter shield, Sfi flywheel and Ram clutch. Rebuilt an older 4 speed I had laying around as well. Big change was rear section of the car. It had a ugly tub job at some point, a...

No, I build stuff primarily for local people. This is something that was going to put in an a body for a guy, then changed direction and built a fabricated 9” setup instead. Thanks

Can do either torino or old style no price change. No brakes included. Bearings with axles so no price change. But would have to tell me if you want the bearing left off if you have a bracket that has to go on first. Thanks

Whatever you want, 5/8 are little extra. Thx

Dana 60, billet housing ends, 35spline axles/spool. Timken bearings and 1350 yoke. 4.10 gears. Everything brand new. Can make to a body length or shorter if you like. Housing is a truck unit, non hd, looks identical to factory just no pinion snubber. Powder coated and perches welded where...

Don't vote for Allen-he doesn't even race Pro stock anymore-retired. Alan P. still is Dart body and Mopar power. Easy enough to stop, just click unsubscribe at the bottom of the first email. Thanks.