Search results for query: *

X2 on the 318 stroker, for maybe even less a 360 built to 400 plus hp with no stroker might be another option.

So around 2.5 amps to power the average size top. Assume around a 40% loss factor in converting dc to ac and now you could be looking at a 3/3.5 amp draw from the battery. so leaving it on without charging for any prolonged period wouldn't work, so just add another battery and go for it. Sure...

One work of caution I would add to anyone thinking about doing this. You will loose a couple of octane points in doing this because the alcohol does add a little to the over all octane. Not a problem for my model engines as the like 90 so I just buy 93 and wash it. I started this thread to see...

Louie, I do add a shot of STA-Bil to my gas after the treatment.

67 Dart. The short answer to Austin and real Gas is no. We live in an area mandated by EPA to sell only gas with Alcohol. I fly large scale model aircraft and our engines are in the 100 cc class 2 cylinder 2 stroke varity and cost in excess of $1000.00 . Alcohol causes the bearings to rust and...

I love to stimulate conversation and this sounded like a good topic to do so. This is not fiction just chemistry. Alcohol by nature is hydroscopic, meaning it readily absorbs into other liquids, gas as well as water. The Alcohol is more hydroscopic to water than to petroleum products. A cool...

Anybody tried washing their gas to get the alcohol out of it. This is something I have been doing for a while on model aircraft engines.

I have a 20111 with the 5.7, 53,000 trouble free miles. 19-20 MPG on a long road trip, that falls off quickly when you add any town driving to it, average is around 15. Ride and comfort is great. If I was buying a new one I'd go for the 3.6 24 valve V6, I have two friends with them and plenty of...

If you are looking for more green but still bright try Gasser Green. The Jeep shows a little darker because of lightning. I too am thinking about it.

Thanks CUUDAK,I also foud a couple of threads a couple of hours after posting that had a lot of great info.

I am looking for some experienced opinions here. I am close to prepping the body for paint so some solid advice will be greatly appreciated. First a little history, the car is a 67 Dart. The car has had at least one paint job and not a very good one, nothing peeling or lifting, just not well...

VOETOM, is that a vacuum actuator I'm looking at. send me a PM when you get time.

Thanks but for $600 a pair for a couple of used Z06 mufflers and another $150 for a controller,I guess if the solenoids are part of the muffler you could use a switch. Think I'll hold off.

I was slumming around on American Muscle's web site and yes I know it's a Mustang site and no respectable MOPAr Gearhead would be caught dead there but I saw this and it looks interesting. I currently have Flowmaster 44's and don't care for the sound...

Nope not the spacers. If you look at the second picture from 67 dart's post, the item labeled slide is what I guess I'm looking for. The Scamp I saw hat that slide inside a U shaped bracket and welded to the hinge right where the hinge straightens out, the picture has a hole there. That made me...

Thanks, I'll go do some more looking. The only car I've been able to look into has been a 73Scamp and it had some kind of bracket attached to the hinge arm hanging down so that is what I thought I was looking for.

Help!!; I'm looking for something that I have no idea what it is called. The part is for a 67 Dart, it is the hanger on the Trunk lid hinge that the torque springs go through. I tried to do a search but little hangy things did not turn up anything. If anyone knows what they are called or...

What a great thread and club. I have traded a lot of emails with Deny and the decision has been made all the while I've been lurking and gathering up the small parts to complete the HDK transformation. Denny order coming soon. Bobby

67 Grill??? Quick update. Things been real slow due to work, been out of state for 6 of the past 7 weeks. The good news is thanks to form member MOPARPARTS (Big Thank you Don) I got left and right inner and outer wheel housings. I took last week off removed the old crap left from the previous...

I would check with ESPO http://www.springsnthings.com/ . I too have a new set of Caltrac split Monos that came with the car, just looking at them make me think it will not make for a good ride. However if you are hooking gobs of HP to the ground these with their bars and adjustable shocks seem...

I keep bouncing back and forth between the Millermatic® 180 Auto-Set , or the Lincoln POWER MIG® 180 . Do you really use the auto set, it seems like such a cool feature. Bobby

Sreyno, Any update on this or pictures. I am thinking about these for a 67 Dart, 360, with a Hemi Denny front end with power rack and pinion also want to Add AC. South Texas in the summer is just too hot without AC. Bobby

If you happen to not smoke or don't like the smell of cigarette smoke try this. Amazon.com: UTC FIRE & SECURITY GE SM200 SMOKE-IN-A-CAN. CANNED SMOKE: Camera & Photo

Looking for left and right inner and outer wheel housings for 67-69 A body.

Show your wheels on a A body with Hemi Denny front end

In 69 as a 20year old know it all, and certanly not one to ask for help, my Dad came out side and saw me jumping up and down on the lug wrench, my scrawny 140 lbs was having no impact on that lug nut. Without saying a word, Dad came over and took the lug wrench from me and proceeded to loosen...

Anyone running the American Eagle Alloys Series 111 or 211, looks like bullet's, American made and reasonably priced. http://www.aewheel.com/eagle_alloy_wheels.cfm?id=2362&cat=471

I am going to install a Hemi Denny tubular front end with a t-bird/mustang II power rack and pinion. It calls for a Saginaw?GM pump, is your pump and bracket the same

If you really want F70 14's try http://www.cokertire.com/tire-sizes/f70-14-firestone-wide-oval-redline.html a little pricy at $211 each.

Very nice. I have the complete Clavert set up with the split Mono leaf and the CalTrac bars. Still trying to decide if I'm going to put them in. Also have his NIB 90/10 front shocks that will not get used.