Search results for query: *

Mancini is out as well

Hey All It looks like Mopar performance has discontinued the rear offset hangers and shackles PN's , P4120075 and P4120077. Doctor Diff has none in stock and no idea when additional inventory will arrive. Anyone have another source? Pete

I bought them from the local chrysler dealer. it raissed the rear end up 3 inches to the factory height of 24inches.

You are right! Even though the catalog says they are same for A" body cars they are too long. I have ordered P4120863/P4120864

Ontario! I also checked the listings that said they are B body springs but most catalogs say they are the same springs used in the A body 340 powered cars. Also, I checked the lengths and measurements to confirm they are A body sized.

Hey All So I ordered the XHD springs for my '68 Dart and the leaf rear loops are bigger than the originals? I ordered new bushing from MOOG, p/n K7309 but they are same as old bushings? They fall right into the spring loop Anyone have experience with the rear spring loops being too large? Do i...

Ordered the Wix 51515XP for a great price on Amazon.ca and the specs on the wix site claim there is an anti-drain back valve so we'll see how it works.

Made in China? I'll pass.

Hey All I have a Wix 51515 on there now and every time I start the low oil pressure light flashes for a brief second. I have read a number of filter threads that say it is not a good choice for horizontal use as there is no valve in the Wix. Any one have a recommended filter that is same size...

Timing was 28-30 degrees and now is 20 or so

Hey All I have a knock that is only heard on start-up when cooled off or not run for a few hours. it goes away at higher RPM or as soon as the engine is warmed up. Oil pressure is good (near 80 lbs at idle and over 40 when driving). I checked the plugs and they are black with soot and wet...

Walker exhaust catalog is nearly useless. It forces me to select application (won't work due to engine change), part number (dont know what part i need) or limited description which does not allow me to enter Dynomax. No options to select pipe sizes or configuration. So, i am not sure what...

Hey All I have been researching mufflers for my 68 Dart - 383 Auto that are quieter than the straight thru Cherry Bombs on it. I am adding an H Pipe in front of CB's and I can add a set of smaller sized performance mufflers in the factory position (behind trans x-member) and I have a few...

Anyone have an OE application that is same as these SSBC rotors? I have heard that older Mustang (Mustang II) are same but have no real testimonials.

Yes I have the replacement part#23078AA1A from SSBC site. Just looking for alternatives, better deal, other sources such as OEM applications that may be sourced.

Hey All I didn't build it so not sure of the clearances at assembly. It does quiet right down when up to temp so i am guessing that it will one day be a problem but for now i will drive it while i look for a block for a stroker.

Hey All My 383 has 51900 Diamond forged pistons and the cold start slap is disturbing. Any one have similar experience? Pete from Peterborough

Hey All I just acquired a 68 Dart with an SSBC conversion kit installed (# A1531) and it needs a front rotor and possible caliper. Any other source for these parts? Are they same as any OEM brakes? Any help would be appreciated. Pete from Peterborough

Yes, they were there but it's a non-club club. There are no meetings (except Moparfest), dues or initiation. They only have a window sticker that flags the vehicle.

Yes, for sure! I will be there with the Arsehole club

Hey All Not sure of the route as yet. Open to suggestions. Leaving Van and heading to Southern Onterrible - Peterborough!

Hey All I am picking up my car in May 2024 and driving it back across western Canada. Will be leaving Vancouver and heading east. I will be posting along the way and I wanted to shout out to the FABO members to join me in the trip where possible. I will follow up in the spring with hard...

Anyone ever hear of an actual sale from these ads? I see the same cars with different locations and prices all the time. I have actually sent inquiries before only to have the answer come back from someone who claims to be out of the country and is selling through a broker. I demand to see car...

Hey All I have some items i would like to have PC'd but I am unsure who does it in S Ont? I have a set of rock sliders as well that need it but they are 6.5 ft long so maybe...

You should turn the saw over and cut with the chain on top of the saw and it will take twice as long to get dull ;>)

Hi All Just a few weeks away now.

I was not involved but I thank you for standing up and offering to travel and appear in court. I for one would be happy to help you out if it comes to that. Keep us posted and I am sure others here would contribute to your personal cost of the court proceedings. Brothers in arms unite! Pete

Run.... They rot, the bugs eat them, insurance won't cover your home if they find out. Trouble all around I say. Pete

Hey I filled one with apple slices and added in a cup of brown sugar, cinnamon, lemon juice and topped it with Oatmeal, top the oatmeal with frozen butter (shaved or shredded). We went fishing and when we got back for dinner it was ready.:cheers:

We stopped using DEET a long time a go and use a number of newer safer? products with eucalyptus oil. You have to re-apply it fairly often but it is better than smearing our grandkids with solvent. Who knows how it would affect them or their kids. To late for me i'm sure. my parents used it...