Search results for query: *

I'll be getting them cut in new shafts. No off the shelf options for that here in Australia, sadly

So I'd be all good to use this brand then? Not many options in Australia for shafts in stock without shipping ex USA

Yes, an Ebay company selling them but seems many eBay sellers do sell the SBI brand. About - SBI

Yeah, found them on Ebay Australia. SBI are a US parts company but I'm not sure what the quality is like. I'll be using Lunati roller rockers on them.

Hi guys Has anyone used SBI (SB International) rocker shafts for their LA small block? Is the quality fine or stay away? Thank you

Hi guys I just finished up my 904 build with a CRT-22X valve body and wanted to know if you must use a blocker rod in the accumulator or can you still use the spring? The instructions that came with are clear as it mentioned you go do either with the - 2X. Its a street car so wanted to keep...

Hi guy's Could someone please upload the instructions for the CRT-22X valve body as I've lost mine. I want to check what is written regarding the accumulator. Thanks

Those are Aussie guys here in Adelaide, South Australia where I am.

Out of interest, did you have the accumulator added back to the valve body to soften the shifts a little?

Can I ask what your car specs are that John suggested the 22x? I'm currently looking at the 2x and 22x but not sure what to pick. Car is a Aussie version of a 69 dodge dart with a turbo 318 making around 600hp at the crank. It's a 98% street car that will see the strip only a couple of times.

What clearance should I be looking to set it at? I see Cope sell a snap ring kit so will order this also.

Hi guys I'm looking to order a BIY 904 500hp rebuild kit from Cope Transmission and wanted to know if the 5disc clutch upgrade fits without any mods done to the drum in a 1977 A904? I've emailed Cope but not getting a reply and as I'm in Australia, the time zone difference makes it hard to...

Thanks for your thoughts. I'm also looking at the Pulsar S372 journal bearing with a .91 twin scroll exh housing. It seems to sit in between the 7875 & 6973 so could be a good match. What's your thoughts on this one? Thinking I might bring the power goal back to 700fwhp Max so hopefully help it...

If it fulls apart, I'll have to put a dirty LS in it hahaha

I'm hoping the engine will make around 400 fwhp and then add boost from there. I'm limiting boost to no more than 14-15psi,so it might make 700 ish fwhp, fingers crossed. But then again, I might decide to stop at 600 fwhp to help it live. My line of thought is that by adding boost, I don't need...

What's considered to be the weak point of the block?

Thanks. I have that oil pump on the shelf, just needs checking before installation. Do you know of anyone that's used a 7875 on a 318?

Hi A body 318 with 9:1 comp Eddie rpm heads Victor 340 intake Lunati solid flat tappet 2400 6600 RPM 235/243 Duration at .050". 110 Degree Lobe Separation Angle 0.526"/0.546" Valve Lift Holley sniper throttle body injection 2500rpm stall 3.45 diff gear Looking to make around 800FWHP but...

How does this turbo sizing look for my goal? AF8006-4016 - BOOSTED 6973.91 T4 TWIN ENTRY

I like the look of the 2058r grind. So a smaller duration on the exh is needed for turbo applications? Thanks for the info.

So I'll be good with 110lsa with boost? Maybe I should look at a 10200703?

Hi guys Im researching to turbo my 318 in my Aussie Valiant and wanted some advise on a cam choice. Im looking at building the following 8.5-9.0 comp Edelbrock rpm heads Victor 340 intake Holley Sniper throttle injection Holley Sniper ignition package to plug and play with the injection Im...

It shows how costly these old girls are to make power. I had a jap 180sx with a stock internal sr20det and with a small frame turbo upgrade on 18psi, small hks cams and injectors running on e85 it made 400rwhp and driven daily both suburban and highway with aircon the whole time for a heap less...

Hey James It's on a 110 lobe sep. I'd probably prefer something with a little less duration but more lift. I might look at some Hughes cams Camshaft Type: Mechanical Flat Tappet RPM Range: 2800 to 7000 Intake Valve Lift: .566" Exhaust Valve Lift: .586" Advertised Intake Duration: 280¡...

Was thinking of a general clean up and open up the bowels to the seats, guide area and port openings matched

Hey James Thanks for the info. I was looking at the bigger pacemakers and they certainly look the goods by your results. What cam part number are you running as that's nice lift with a mild duration, I tend to like mild duration big lift cams. Out of interest, who is SA did the heads?

South Australia

Two summers ago in Adelaide, South Australia we hit 47.6deg C Nice and hot!

That's what the windows are for

Hi all Can I get some thoughts on a 408 build I have rolling around in my head. I'd like to get about 500hp from it at the engine. Would this set up get that figure? I chose the cast crank as I contacted Scat and they rate it to 700hp and 7000rpm but no power adders and trans brake. 360 block...