Search results for query: *

Devon @70DusterDev has worked his *** off with that combo, and done really well with it this year. He was so excited to finish and be the winner in Street machine eliminator. And he did it with a stick shift. I say well done sir. It’s ok if some people don’t like the LS, but they shouldn’t...

Check out the recently released Orange loctite. It's between the blue & red level hold. As rightly mentioned above, clean threads well before using.

Nice!! Thanks

Put me down for 2! Lmk...

Tim takes a vacation once in awhile and the guy that fills in is not only nicer, but better looking too.

All of you guys. Bunch of trouble makers from the word go. Lol

Same difference to me. Yuck

I see that you have a mismatch in machining. You're going to have to start from scratch in half either the heads cut which is probably the correct way or the intake. If you bolt up the head to one side of the head and you have different thicknesses from top to bottom on the opposite side then...

Who, me. lol

Not going to say I wasn't disappointed when I saw the motor. But he put in the work and got the win so he deserves the congrats. Plus it was better than watching another Camaro do it.

Who is this guy pretending to be @Newbomb Turk and what has he done with the real Tim?

That's what I was trying to say. It ain't right. What kind of distributor is it exactly?

Congrats on your 2024 Drag Week Street Machine Eliminator Bracket win!

You really call that a Mopar. Anything with a Chevy engine in it isn’t a Mopar

To the op I would set the compression around 10.5 and put a solid flat tappet cam in (something close to these two) and run it. HUG STL4246AS-8 SB SLD FLAT TAPPET CAM 242/246 -108ºLSA HUG STL4650AS-8 SB SLD FLAT TAPPET CAM 246/250 -108ºLSA Even if it falls 15-20 short of your goal it...

How do you figure 2" loss? Theoretically, the 305 should be less than a half inch narrower in section width. Is the tread that much narrower on a nitto? Personally, if i have room for the height, I'll take the taller tire every time!

Too late. I just got done doing 2x3 tubing sub-frame connectors on my '73. Slotted the floor and welded them solid. Well, I slotted the floor but in the interest of time I had a buddy weld them solid. He did it all in about 4 hours (sub-frames connectors and front/rear torque boxes) while it...

Or I suck as a head porter and engine builder and it’s going to struggle to get to 450. I expect that is closer to the truth.

There was even a Mopar A-Body that won the Eliminator bracket race. He said on FB when he got into Drag Week that he wouldn't even place in the class but was glad to be able to participate, and yet he won the elimination round. Glad for him. I am pretty sure he's a member (@70DusterDev) here...

Don't forget you have a ported tunnel ram, two 750s and a dyno to tune it. If you only make 450 then you quit the pull early lol.

Here is the song I often think of

I have what are supposed to be correct screws. #8 fillister head. The one hole all the way to the right is correct size for screw. The other 3 holes across the bottom are too large for that head. I have another bezel I used for pieces and partsand it has the same size holes. First picture shows...

Rain. So much for mowing. Decided to work on Studebaker, drivers door. Vent window had to come out. Tension made opening it quite difficult. So i loosened the nut/spring tensioner. Pain in the butt. Going to keep picking away at it.

Hi I have a clean air package part that was used on 1955-1965 Chrysler models only this was used to reduce exhaust emissions comes with the Instructions and box . $ 100.00 ship

P/m sent. Kim

I had a little time before we go do other things, I used my old motorcycle lift to get the heavy A833 up to the floor of the Dart just to see how it all works. I now understand the dogleg thing, so that makes room for the shoulder of the right side of the transmission. Makes sense now. I have a...

I cannot Footbrake AMX because it is so cramped inside for me when I get my Dakota finished I will probably footbrake it some because there is much more room in it

@GTX JOHN

Looking for .20 over size 340 pistons and how much?