Search results for query: *

I think he's talking about LS 427 it has a 4" stroke. Not BBC 427 with a 3.76 stroke.

Dang dodgers playing like they mean it....

Up for sale are the two pieces of trim off a 68 Barracuda. Overall condition is very good. Top piece has some light scratches and one small goudge(see pic). Bottom piece(2nd and 3rd pic)is in better shape with a few small dings and a few scratches on the bottom. I would say the top is an 8 out...

Well just sayin' but you don't actually have to move it somewhere to get a good ground. Those can be problematic because of the paint/ coating. I don't know whether it's really high quality paint (epoxy?) or powder coat, or what, but they MUST be scraped to metal to get grounded. I am...

Dutra sold to Clifford, and then sold dutra duals to Australia....Spitfire sold out to Laysons..Im sure everyones getting royalties.

Both use keyways

No. All factory Slant-6 water pumps had a 6-blade impeller. Cast iron or phenolic until around '67, then stamped steel. Recent aftermarket pumps have 8ish-blade stamped steel impellers.

I was culling through my stock of stamped rocker arms yesterday, looking for a set to clear the 1.5" O/D springs on my 360. Some are ground for clearance, I always assumed bcause 340/360 springs are larger diameter. Also, some have a more pronounced "detent" where the spring/retainer would be. I...

69 Camaro?

Huh? Never mentioned crank gears......But I do have a Milodon gear drive with a crank gear... ?

Photo #1-2 Looks like the head of drum brake show retainer. Photo #3-4 Never seen it before on a 67 Photo #5-6 looks like the the clip that holds the cat whiskers to the door, or perhaps the hood to cowl seal. Photo #7 Fuel / brake lines under body

did they do the A/C-non A/C fin count change? Ive seen so many rigged Mopar pulleys with spacers you'd think it was stock.

So are you implying that the crank gear wobbles around on the crank snout ? Whats the clearance difference between the 3 ? I have torn down many 100,000 mile engines and don’t recall any weith wear . Crank or cam ….

its illegal on the strip but other than that, sounds like a winner! That Dex-cool about ruined my Suburban. Going on a multi state road trip and we pull into an Albuquerque service station running a little hot. Right as I'm about to pop the hood, the stat housing blows out and dex cool shoots...

I think the LCA bushings having been torqued with the suspension hanging down is a good diagnosis: they will be heavily preloaded at ride height. Could also be due to a strut rod being too short/long, causing the LCA to bind.

Message sent

...(2) used 741 1-3/8" straight pinion bearing pre-load spacer $5.00 each Pending (1) used Axle housing adjuster with lock retainer $25 (2 pr) New axle retaining plates for 'Green' style ball bearings $5.00 / pair (1) used "Limited slip lube tag" $6.00 ***SOLD*** All plus shipping from 56007

with gask-a-cinch......? How about AL spray paint on copper head gaskets? I dont see any issues unless its a sliding gasket face like on a slant exhaust manifold or the bottom of a head that takes a certain RA so the MLS gasket bites OR slides.

Ive seen oil drive hex worn almost round and all that torque runs through that keyway. Had SG rear axle splines twist almost a full spline right out of the carrier, stuff happens.

I dont know.... can a regrind achieve increased duration and lift? I've never gotten one. Do they grind down the base circle thus requiring longer pushrods?

This came above is very similar to the lunati in my Javelin. Flat tappet though Son wants lumpy angry sound, more than dads. SER2226ALN-10 is the Hughes cam he's after. The 222/226 duration with 110 separation is what he wants. We're trying to make that happen. Maybe we won't. Isn't quicker...

Given the issue with big holes under the trunk trim, if you need the corner pieces send a pm

I used a Magnum nipple and adapter plate on a 360, worked. Some say you have to bend the plate a little for it to seal but Mine sealed fine.

I have 2 moving blanket car covers for cars. Thick, soft from Cover Craft. Like I said they see up Cali Car Covers stuff.

nice grille, never painted???

The water store on the corner has spigots where you fill your 5 gallon bottles under. They used both hot and cold valves so they turn on left and right!

Fresh Build 727 Transmission SM Blk with Turbo Action Automatic Shift VB Billet Low Rev Servo With HD Spring Acc Blocked Early Frt Servo With HD Springs Modified Oiling Mods Teflon Rings New Pump Gears Alto Clutches Red HP Flex KD Band Red Rev Band 3.8 Lever HD Band Strut Deep Steel Pan with...