Search results for query: 66 barracuda

yes, it appears to be a tight fit and I too wouldn't weld, or in my case, I'm going to do what Neil did, bolt it in, but still want it centered perfectly;)

...in exact VIN or SO number sequence, but, that still seems like a big gap for one day. If that gap is consistent, Mine must have been built the 2nd day of production. I've looked at '66 Barracuda VIN's for over 40 years now and haven't found an earlier one than mine. Still lookin though! :lol:

If you can cut and weld, go after it. It's not that bad. Currently doing a ground up on a 66 Barracuda. It's getting floor pans, trunk/tire well, quater panels, front fender corners and other various patches. The Dart would be worth the work.

64/66 splash shields. Got them from this sight last year. $75.00 shipped. Check or MO. Thanks, Ben

I changed my complete dash from a 65 Dart to a 66 Barracuda in my 65 Dart wagon since the Dart lacked an oil pressure gauge and the 66 had one. I also wanted a digital dash so had Dakota Digital do the conversion. Prior to sending the dash, I had the bezel restored as Dakota Digital only does...

Anybody still read old threads? How much/what are the differences between a 1963-66 Valiant convertible back seat bottom and a 64-66 Barracuda back seat bottom? Interchangeable.

There is not much I have ever been able to find on that '66 color scheme. Maybe someone in the know can weigh in. I personally believe both the outer circle and inner fish circle were black. I have seen on line some restorations that would suggest otherwise (as in blue in center). Like this...

My first Mopar was a '67 Barracuda convertible /6. No pics. =( My introduction to Mopar was my dad's '66 Coronet 440 convertible with a 383 and a console shift automatic. We got T-boned by a drunk driver in his faggy little camaro with a 350. ****** tried to get away, my dad chased him down and...

We always drove our cars a lot. My brother put a 300,000 miles on his 67 Barracuda with A/C, I only put about 250,000 on my 64 barracuda and about 100,000 miles on the 68 original 383 fastback. Both the 66 and 67 have 273's, mine high performance, his stock 2 barrel with a 340 TQ and both...

Interesting one here. My 66 early a has no horn. If I ground the relay they work. I have ohm checked the black wire to the horn button- no resistance- good wire and good contact. The main steering shaft is isolated from ground. Anyone see this before? The ground stops at the Borgeson u-joint...

I have the sill plates for the doors but not the inner pieces that hold down the carpet. I do have the rear extension pieces though.

1 Set (Left and Right) inner fender splash shields removed from a '64 Dart. Will fit '63-'66 Dart. I am not sure if they will interchange with '63-'66 valiant and barracuda - they might, but do your own research on this. They are not perfect but can be used and made to be very nice. the outer...

I bought a new 1969 fastback barracuda 340,4 speed,sure grip on 10/25/68. It was by far the best car that I ever owned. I have a lot of nice cars both before and after. I won a lot of races with the barracuda. The only car that ever beat me was a 70 mach 1 Mustang with a 428 and 430 rear end...

I've asked my buddy what year his distribution block is from. He has a Barracuda, but I'm not sure what year. If I'm basically going "stock" drum/drum but with a '68 style dual circuit master cylinder, are these the type I'm looking for? ( I was gonna post some OEM used ones from eBay, but...

So I have begun the cleanup on one of the 66 Barracudas I recently drug home. This car is over all really really solid. I got the outside cleaned up as good as I can for the moment, and I need to get to the inside. Unfortunately it seems the passangers side door latch seems to be seized up fro...

I'm curious how many people have bought cars from across the country without seeing the car in person. There's a 66 barracuda in NV that i'd love to look at and possibly buy, but i can't just jump on a plane without planning a vacation around it. I don't even get 2 days off in a row in my job...

Both my cars are 74 disk/ 2-1/2”x10” drums. 66 Barracuda 273/auto 3.23 and 72 Demon 340/4 speed 3.91 Both stop easy and effortlessly with manual masters.

Don't know that this adds much to what's already been posted, but here's the trunk of my old 66 Barracuda. Carpet is faded but original. Inside of the rear quarters should be body color, sides on this have been undercoated. Trunk side of the drop down panel was black no matter what the body...

...know all this **** but it was so long ago since i thought about it i've forgotten most of it.. uw put a liw gearset 904 in my buddies 66 barracuda and it works well.. that thing has a stock long block, hemi gring cam and a street tunnel ram with that low gear 904 ans a 3.23 gear. damn...

Here's what I have for my '66 Barracuda Formula S. It has the 14 X 5 1/2" wheels.

Not in a Dart but I put 66 Barracuda dash in my 66 Valiant. I had to trim a little off the Valiant dash frame and make up a new multipin connector. Works great, get the entire dash including the glovebox.

I’ve had a 66 Barracuda for the last 30 years, and they’ve always been called early A bodies, why would you expect them to change the name of this sub forum to suit your opinion? Follow the herd? When I first got my 66, I was literally the only one buying parts, guys at the Nats and other swap...

Yeahhhh... it's gotten worse. I last commented on this thread a few years ago. Things have changed since then. '70 Dart Custom, 340 4 speed (owned it 22 years now) '67 Newport Custom, 383 727 '66 Chrysler Windsor, 440 727 '49 Fargo 1/2 ton on '66 W200 chassis, 440 4 speed '57 Dodge Royal...

I was told that the 65 and 66 seats were different. The 66 seats are narrower than the 65 seats, because of the console. I am putting a 66 console in my 65 barracuda and wouold like to use my 65 seats. would they fit? Or are the 65 seats to wide. Does anyone have any experience with this type of...

I am trying to decode my 66 barracuda fender tag. I hardly has any info on it. Can someone decode it? Thanks

Please let me know when you come up with a 66 barracuda backup lense.

When I bought my 66 Barracuda, the engine was damn near identical to yours, but set at 10:1. It even had the same rearend/gear and transmission. It was lazy out of the gate, but liked rpms, which is what I have been told about 340’s. I wish I could tell you that I just installed a different...

Yup confirmed the 64-65 fits a 66

The upper quarter panel spears are aluminum on the '66 Barracuda also. You can use those and the 4 door ones on a convertible by cutting off the excess length on the rear of the molding. The '64-5 Barracuda uses a stainless one, but the width and contour is different and won't engage the...