Search results for query: *

I have a new set of QA1 upper control arms for 67-72 A Bodies - small ball joint. Part number is 52303. They were installed to the upper mounts but not to the knuckle so ball joints wee not tightened down. They have some scratches but are in excellent shape. $350 delivered in the lower 48...

I have a nice set of 73 up disc brake calipers and the caliper brackets. They have been cleaned and painted semi-gloss black. $190 plus shipping PM me with questions

I have a reconditioned 8 ¾ housing from a 69 Dart. All the dirty work has been done on this housing. It was wire brushed down using electric and air tools. The housing was then cleaned thoroughly inside with a large engine bore cleaning brush, solvent and paper towels and blown dry. Two of the...

I have a nice used set of 3.23 gears for an 8 3/4 rear with 489 case number. Overall shape and Pattern are good. No rust or pitting. One small mark on outside of the ring gear which is outside the gear contact area. Price is $90 shipped in the lower 48 states.

Road Race springs are sold I also have a set of new Mopar Performance Super Stock springs part numbers P3412002 & P3412003. I do not have pictures of these unwrapped. They are still wrapped up in plastic which you can see in the last picture beside the road race springs. I will sell these...

I have a nice pair of small bolt pattern axles from an 8 3/4 A Body differential. Bearings have been converted to the sealed bearings. The axles have around 2,500 miles on them since the bearings were converted over. Both axles have right hand threaded studs. Price is $100 plus shipping...

I have a new 11.7" rear disc brake kit from Doctor Diff that I will not be using. The kit has all parts that were included in the kit when purchased includes the calipers, caliper mounting brackets, hardware and lines from the calipers, pads and rotors that are drilled for the large bolt...

I have a reconditioned 8 ¾ housing from a 1969 Dodge Dart and the stock axles in 5 x 4” (small) bolt pattern. The axles have had sealed bearings installed and have a few thousand miles on them. All the dirty work has been done on this housing. It was wire brushed down using electric and air...

I have a nice used set of 3.23 gears for an 8 3/4 rear with 489 case number. Overall shape and Pattern are good. No rust or pitting. One small mark on outside of the ring gear which is outside the gear contact area. Price is $95 shipped in the lower 48 states.

I have a reconditioned set of spring perches for 8 3/4 and data rear ends. Perches were wire brushed, dipped in Evaporust, primed and painted semi-gloss block. A wire brush and die were also run over the threads. Ready to install. $100 shipped in the lower 48 states.

This is a new set of QA1 tubular upper control arms. QA1 part number is 52303. Fits 64-72 A bodies. These were purchased recently and the build direction has changed. They are powder coated and feature polyurethane bushings, grease fittings for the upper bushings and new ball joints...

I have some extra suspension parts I do not need for my A Body project. Prices include shipping in the lower 48 states. These parts will fit a 67-76 A Body. 2 American Muscle aluminum 11/16” tie rod sleeves $70 Energy Suspension rear spring poly bushing kit for 2” front spring eye – front...

I have some new front suspension parts I do not need for my A Body project. Prices include shipping in the lower 48 states. These parts will fit a 68-76 A Body. 2 Moog 11/16” tie rod sleeves #ES319S (need to be used with 11/16” tie rods) $25 2 American Muscle aluminum 11/16” tie rod sleeves...

I have some new front suspension parts I do not need for my A Body project. These parts will fit a 68-72 A Body. All prices include shipping in the lower 48 states. 4 McQuay Norris tie rods 2 # ES401RGL (right) and 2# ES401LGL (left) $75 for the 4 1 McQuay Norris left lower ball joint...