Search results for query: *

1045 Billet Steel Flywheel - New-440 Source

I bought a bunch of aluminum, hexagon tie rod blanks from Speedway Motors, on clearance on Ebay, a few years ago. I think they were made by AFCO. They were gold anodized. Ended up getting the taps on ebay and bought a handful of lock nuts from Speedway as well. EDIT In hind sight, they weren't...

I have a strip dominator as well that I was contemplating using. Wondering if they have as much potential as some of the other single planes?

Sorry, I was referencing when you upgrade to 2.055 and 2.080 valves.

Could you please share the part numbers for the valves you are using? Thanks

Had the same issue, pulled the threads out of a marette, drilled a hole through it slightly smaller than the hose ID and shoved it in just before the PVC valve. No more whistle... You may have to experiment with hole size.

eagles 52

Friday/Saturday? isn't it usually Saturday/Sunday?

Wheel Vintiques

15X8 WHEEL VINTIQUES WITH DOG DISHES. 235 60 15 FRONT AND 275 60 15 REAR

I had L4,L5,S1 fused at the age of 35. Its been 13 years, I traded one pain for another by having the surgery... I pretty much didn't have a choice though as my legs would go numb with radiating pain down the *** and legs. I have never been given anything for pain since I had the surgery. Makes...

What size is the roller on these? Tried to find it on summit's site but it doesn't have that info.

It's easier to simply grind a small groove inside the head bolt hole up to the oil hole with a burr, then you don't compromise the integrity of the stud as well. It literally takes 30 seconds to do.

I grind a small groove inside the bolt hole in the head to the oil hole with a carbide burr and a die grinder.

Rams 57

Engine Masters just did a comparison of split pattern and single pattern cams using manifolds and headers on 372 SBC with 10.5 to 1 compression. The split pattern made more power in every configuration.

This^^^^ You are bolting the exhaust system to the seat belt anchor plate. Need to get the proper mount from year one that mirrors the right side of the car. 1966-74 A B E-Body Muffler Support Bracket 1967 1974 A B... (yearone.com) ....here you go, TTI has them for $32! Accessories (ttiexhaust.com)

Sorry for the lack of updates. Started a new position at work about a year ago, really cuts into my time and motivation level. Also, with the border closed, my parts supply is cut off... I have always gone to the WPC swap meet in Michigan, the Indy swap meet, Moparfest etc. nothing in the last...

Subscribed

Die hard Weber Smokey Mountain fan... Couple that with a BBQ guru controller and you can set your brisket and go to bed without ever having to worry about anything.....They are like cars, you can mod them up with doors , latches, handles, wheels, hinges.... Its addictive

PBR, would these be capable of opening the seat from like a 2.02" valve to a 2.055"? Juist curious

Love this stuff....still waiting for my speedmasters to arrive from the Black Friday sale. Apparently on back order.

Love it! Keep up the good work.

Awesome work, as always! Can’t wait to see what you do next!

Ditto

I bought one, haven't put it to use yet but it looks nice and the price is right.

1045 Billet Steel Flywheel - New-440 Source billet steel, $149.99

Rocker to frame rail brace.

Once I had everything where I wanted it, I mig welded the inside of the brackets. These welds will be covered as I made a top plate with a couple holes that I went over with a dimple die. This is with the top plate and j-bar laying in place. I have some more work to do but it should stiffen the...

To tie in the the shock mounts to the j-bars, I made up these brackets from 1/8” cold rolled and some DOM tubing. Obviously I was inspired by the Hotchkis Duster.... It was a compromise of getting the bar as close to the corner of the firewall/inner fender landing plate, keeping it within reach...