Search results for query: *

Selling a brand new set of TTI headers for a gen3 Fits: 1967-76 A-body, 1962-74 B-body & 1970-74 E-body, Ceramic Coated with a Thermal Barrier. TTI part number TTI61HCA-R2C4. I was hoping they were going to be close and could use them in my 65 but it didn’t work out. Just unwrapped the bubble...

New Holley filter/regulator changed direction on the build and don’t need it. $100 plus shipping

Selling this champ pans road race style pan. Part number CP360-7 with pickup and dipstick. Located in Redmond Oregon. $300 shipped.

Used billet distributor for small block, Locked out comes with a good set of MSD plug wires. $175 shipped. Located in Redmond Oregon

Selling this oil filter adapter with a new gasket kit & bolt. $95 shipped located in Redmond Oregon.

Used 26” cold case 2 core radiator with dual 10” electric fans modified for -20AN inlet and outlet $300 located in Redmond Oregon.

Used Champ pans 360 oil pan CP360-7 with pickup and dipstick modified for steering rack clearance $250 located in Redmond Oregon.

All parts are located in Redmond Oregon. New “A” engine dipstick/tube raw $25 Used Small block headers (mismatched pair) headman tight tube block hugger & pacesetter Ram/Dakota $75 Used Areomotive fuel pressure regulator #13204 $125 Used Performance Quotient BFD31801 neutral balance damper...

All parts are located in Redmond Oregon. Used Comp hydraulic flat tappet cam with lifters 500 miles. $150 Used Comp mechanical cam (no lifters) 1500 miles. $100 Used Bullet hydraulic flat tappet cam with lifters & springs 300 miles $175 90 degree oil filter adapter with new bolt & gaskets...

Selling this custom made turbo kit, it was made to fit in a early a body with a factory k frame and torsion bars, the early a body is the smallest engine compartment there is so theoretically should fit any Mopar car or truck. This was made up of a modified headmen block hugger header for the...

Selling this custom made turbo kit, it was made to fit in a early a body with a factory k frame and torsion bars, the early a body is the smallest engine compartment there is so theoretically should fit any Mopar car or truck. This was made up of a modified headmen block hugger header for the...

Here’s a complete set of adjustable rockers with banana groove shafts. Was going to go with a solid cam and decided not to. In great shape located in Redmond Oregon, $250 plus $20 to ship.

Selling a set of blue stripe Mopar performance valve springs. 0.400-0.475 lift and 1.42” diameter. Located in Redmond Oregon. $50 shipped.

Here are 3 manual transmission shift linkage rods, you are purchasing the blue/green rods. The dirty rods have sold separately. It all came in the trunk of a parts car I acquired. $75 shipped. Located in Redmond Oregon.

Selling a timing set, has 100 miles on it went to a different cam and needed more adjustment. $35 located in Redmond Oregon

All parts are obo and are located in Redmond Oregon. I have 3 used cams, $75 each plus $20 shipping. 1 comp solid lifter 1 comp hyd. lifter 1 bullet hyd. lifter for boost 3 motor mount sandwich one is a interlocking Mount $75 for all plus $15 to ship. PENDING A pair of motor mounts off my 65...

Ok all parts are located in Redmond Oregon, all parts will be shipped at a flare rate of $15 in a flat rate box with the exception of the headers. pulley assortment $20 for all *SOLD Moroso crank pulley $20 Transmission speedo gear housings $10 Each Bracket assortment $25 for all *SOLD Oil...

Selling a pair of big bolt pattern a body 8 3/4 axles and a single small bolt pattern axle all for $125. Also a pair of 8 1/4 rear disc brakes out of a Jeep Grand Cherokee that are easily adapted to a 8 3/4 $150. One 360 bare block $100, a pair of smog heads $50, and a 360 crank $50. All LOCAL...

Selling a few items I couldn’t get myself to throw out. Parts are located in Pasco Wa all prices are shipped to you. Two different sets of motor mounts $65 each, spring brackets with new bushings $50, without bushings $40, trans crossmember $70, headlight bezel I believe 65 dart $45, Z-bar &...

Just finishing up my mini tub on my 65 valiant, selling a complete bolt in A Body 8 3/4 differential, converted to big bolt pattern, drums are re-drilled to 5x4.5. Green bearings, 3” studs, Richmond 4.10 gear with sure grip & 489 case with large yoke. Looking for $1200 obo not willing to ship...

Hey guys I’ve got a couple more things I’d like to sell. Everything located in Pasco Wa, and is priced shipped to you with the exception of the 8 3/4 axle, I will not ship it. Moroso oil pan and pick up $165 shipped. Has a couple slight dents.

Going through some stuff to down size before we move, all parts located in Pasco Wa and are OBO. Mopar Performance Single Valve Springs Blue Stripe 0.400-0.475 lift 1.42” diameter $65 shipped. Speed Pro hyper pistons .60 over bore good used, $170 shipped. Comp Cams Camshaft, Hydraulic...

Selling a complete large bearing 9" came out of a mini tubbed 70 Dart. 31 spline Dutchman axles, Nodular Currie 3rd member with Billet support and Billet 1350 yoke, 4.56 Richmond gears and Detroit locker. Housing measures as follows 44.5" housing flange to housing flange 35" from center pin to...

selling a set of comp solid roller lifters bought from member 340Truck almost a year ago, haven't got around to using them. They were mocked up and just used on the Dyno looking to get my money back out of them, $330 shipped. also bought a bronze gear with hardened oil pump shaft from another...

selling a set of comp solid roller lifters bought from member 340Truck almost a year ago, haven't got around to using them. They were mocked up and just used on the Dyno looking to get my money back out of them, $330 shipped. also bought a bronze gear with hardened oil pump shaft from another...

Got a pair of headman tight tube headers $200 shipped to your door, a matching pair of early a body exhaust manifolds with head pipes $160 shipped, and a single 1971 small block 318? Exhaust manifold $70 shipped. Parts are in Grandview Wa.

Ok we have moved and I'm trying to work through my parts to sell or throw away, I've got too much crap laying around. Most parts are early a body some are later a body. If you see something pm me and I will give you a price for that part(s) packaged and shipped to your door. No "checking on...

Picked up a complete sbp 4 piston disc brake conversion at the local swap meet. I would prefer not to ship because it would cost so much but if you want to pay it I'll ship them. Looking for $300 or open to offers.

Selling a v8 centerlink out of a 65 barracuda. Had a v8. $125 shipped, located in Grandview wa.

Selling a complete set of PRW rockers for a small block. Rockers have 1600 miles on them. I paid $394 plus shipping. Asking $300 or best offer. Will also trade for a victor series intake.