Search results for query: *

  • Order by date
  1. C

    Upset with Degree wheel findings

    If you had mentioned using max lift clearly in the first post, things go different. The .050 value is used plenty to get ICL. Tappet lift, either side of max lift. Even after doing that method, it's a good idea to go back and check the tappet lift numbers, in this case the 6 and 40 to get...
  2. Unconventional

    Stop in for a cup of coffee

    Sumthin sent from Idahohoho https://www.nhra.com/news/2025/tv-schedule-enjoy-nhra-fox-drag-racing-highlights-through-january
  3. Yunick13

    Toughing it out on my perch

    Vernon County.
  4. Unconventional

    2024 14th Annual FABO NHRA "Pick 'Em" Game - It's NITRO Burnin' Time Again!!!

    In case you get tarred of waiting for the Gators https://www.nhra.com/news/2025/tv-schedule-enjoy-nhra-fox-drag-racing-highlights-through-january
  5. joel d. snyder

    12 Dad jokes

    ah, are you guys in luck. i was gifted 400 dad jokes. 1.why did the turkey join the rock band? because it had drum sticks. 2. how is a baseball team similar to a pancake? they both need a good batter. only 398 left to go.
  6. A

    Upset with Degree wheel findings

    Yes I did it just like the video showed what to do
  7. A

    Upset with Degree wheel findings

    Thank you Thank you Thank you, yes that is what I was trying to describe....
  8. C

    Upset with Degree wheel findings

    He is just trying to check installed centerline. I think he is referring to .050 as the degree wheel readings .050” on each side of his max lift. He is not talking about the cam duration.
  9. slantsixdan

    1 wire internal or external oem alternator

    No advantage, plenty disadvantage—chief among which is if the regulator fails, you don't get to just replace it in five minutes wherever you happen to be with the spare you grabbed out the trunk (or bought wherever). No, you're stuck until you replace the alternator. There are worthy alternator...
  10. Plymouth 65

    68 Cuda Funny Car

    Nice, definitely would be nice to know the history on the car. Great build. 65
  11. A

    Upset with Degree wheel findings

    thanks I will look at this and see what I did wrong
  12. A

    Upset with Degree wheel findings

    The LSA is 111 says Lobe center line: 107 The 107 is what I was adjusting for! Was I supposed to adjust to the 226 \ 2 = 113 ?
  13. B

    Need help with edelbrock 1406 carb

    And RRR, you need a refresher course in physics. Pressure & volume are two different entities. In terms of supplying fuel to a carb, there is no 'fighting' between the two. They work together. There would be no volume of fuel delivered to the carb without pressure.
  14. Dana67Dart

    1 wire internal or external oem alternator

    I replaced 2 alternators between 4 cars in 18 years. 67 dart with run of the mill parts store (Kragen) rebuilt from 1990 (28 years) And 96 Jeep Grand cherokee, replaced the OEM alt 5 years ago. (23 years)
  15. harrisonm

    funny pictures

    Asking and getting are two very different things!
  16. B

    Need help with edelbrock 1406 carb

    The moron is the one doing the typing in post#105.
  17. 1MeanA

    Upset with Degree wheel findings

    Probably not much help now but I installed an Oregon cam a year or so ago with the same Cloyes chain set....no issues (at least the motor runs lol). I hadn't built a V8 in a number of years so I referred to this video which I thought was straightforward.
  18. B

    Upset with Degree wheel findings

    Nick, You are correct. Don't know what I was thinking.....
  19. 72bluNblu

    Best Aftermarket Suspension Set-up

    Those don’t look any more tucked in than the Doug’s D453’s on my Duster. You can see 2/3 of the header flange below the frame rail. What’s the distance from the top of the header flange to the floorboard? Car looks like it sits high enough that header clearance isn’t much of an issue anyway.
  20. harrisonm

    DUMB MECHANICAL OIL PRESSURE GAUGE QUESTION

    I have often thought that, but I have installed several, and they all worked fine without priming.
  21. B

    Idle shake

    Shep, You said the idle rpm increased when you increased initial timing to 30*. Does not surprise me at all. With other symptoms, all indicative of a bigger cam. So is the increased idle speed to keep the engine running, part of the 'cost' of a bigger cam.
  22. A

    Upset with Degree wheel findings

    107+115=222 and 222/2=111 LSA doesn't it?
  23. B

    Idle shake

    Post #24. Nope, you do NOT want misting or fuel exiting the boosters at idle. This would mean the main system is operating at idle, when only the idle system should be operating & supplying idle fuel to the engine. A very common cause for this is a 'big [ger]' cam that needs more air & fuel to...
  24. CFD244

    DUMB MECHANICAL OIL PRESSURE GAUGE QUESTION

    Hi Folks Does the 1/8 feed line to an aftermarket mechanical oil pressure gauge need to be primed before connecting it to the gauge or does it get connected dry? In all honesty, I don't ever remember priming one. Thanks FABO
  25. B

    Upset with Degree wheel findings

    There is an error in post #1. 111 LSA, 107 ICL, 115 ECL. LSA should equate to ICL + ECL divided by 2, but it soesn't...
  26. ZMAN24250

    New EQ Head port misalignment?

    I borrowed a factory magnum head from a friend and found that the floor of the port was 0.450" from the deck and the ceiling was 2.600" So these "magnum" eq head ports are every bit of 1/8" off or more.
  27. RustyRatRod

    Upset with Degree wheel findings

    It appears what you did was the correct procedure, but you simply made a mistake somewhere. Happens all the time. No need for a senior citizen home. It's just a hunk of metal. You'll get it figured out.
  28. Cudakid2967

    68 Cuda Funny Car

    Some pics of it sitting on a chassis from a couple owners before us
Back
Top