Search results for query: *

I like the 1968 interior better so im swapping to it, but the 1967 buckets have solid backs vs the 68s. Will the seat foam and cover from a 68 go on my 67 seats? I cant imagine them being too different

I have one lying around, has been bored .040 over and is a bit rusty but can be hot tanked. What would it be worth all cleaned up, painted, hot tanked, bored .050 over, im considering selling it inorder to fund my car build but if it isnt worth it then I'll just keep it and make it into a...

The car was daily driven by my grandpa down in palm springs and when he drove it up here to canada and we went to start it up we got no spark past the coil, the coil is brand new and the plug wires are good, we have power at the coil and the white resistor box. It did spark once at the coil wire...

Well I figure I'll remake a resto thread of my dart in hopes of people being able to gain inspiration or seen that doing this stuff isnt that hard. Right here we have a prestine '67 Dodge Dart GT! Now wait a minute, the title clearly says '68 so something aint right here! Well, I've always...

While I'm restoring my dart I like to look for some good color choices, its been dubbed "Project Satan" so everything is going to be black and red, real mean looking. I haven't found too many good colors, I guess this can be a starting point at what color im looking at, no darker than this...

I have a 1967 Dart GT that I'm cloning to a 1968, it has buckets which have the plastic back on them which was a one year thing I'm pretty sure. I like the look of the plastic backs but i also don't want to shell out a load of money and have to hunt for some 1968 buckets. I don't think they...

Looking to find one under $5000 sort of close to me but may go a bit farther for the right deal. Let me know if you know of one or have one. Any condition, any engine

I don't know if it was from what appears to be a hit at the front, or it could be from the one of the past owners who thought it was a good idea to pull the car out of a field with a tractor by the bumper bolt holes but my front clip is trashed. I have ordered two new inners and I'm still...

One is from a 1968-1969 green car and the other is off a '67. $125 each, both in equal condition, green one has surface rust on the bottom while the blue does not. Only pictures I have of the blue one are when it was on my dart Located in Edmonton Alberta, I don't know...

Looking for a driver condition truck within a fair price (under or around $3000), I have a 1991 Short box Regular Cab ram but I like the older body style much more, would consider a trade. Shoot me a PM, thought it wouldn't hurt to look. Be nice to see some US trucks also, chances are I won't...

Not going to cheap out on this piece for my car since its pretty big, shoot me an offer, not looking for $500 show room piece but still a very nice one.

Dad had these on his racecar, no longer needed. $40 OBO

Looking for $250, will need to be rechromed or you can put them on an old car your trying to sell to make it look nicer, whatever works. Located 30 minutes east of Edmonton, Alberta. North of highway 16 No idea on the wheel sizes, will measure tomorrow

I'm not talking about the grille and front fenders, but the frame rails and inner fenders. I have a rust free '67 Dart that was hit in the front and I want to transfer the front from a '69 that I'm parting out that hasn't been hit. Any idea where I should start, should I use all the pieces or...

I just bought a 1969 Dart that I am parting out and it had some holes along the windows that look to be for trim, I can't find any pictures of a car with this though.

I got this car the other day, I took the hood and the doors off of it to use on my 1967/1968. I call it "That '70s car" it has a sunroof, air shocks, and a crushed velvet headliner over the stock headliner. Originally a blue interior, someone stuffed a 1967 GT interior in there. Dash is iffy...

I have a 1967 Dart I just bought, the entire car is rust free bar none, however the front had a light fender bender at one point which knocked the passengers side frame rail out of wack and maybe the drivers side. My plan is to cut the entire front end off and rebuild it with new components...

Pretty self explanatory. The front rails in my dart are tweaked and I need a straight pair. I'm located in Alberta, Canada Unless someone knows of where I could get a brand new repo piece.

I have 4 mint aluminum slotted rims, back are 8 inches wide and front is 7 inches wide. I got these with the dart I bought but I will be using different rims. Awesome condition throughout each rim, one has a slight scrape on the side 1 inch long by 1/4 inch wide. $400 When I got them After I...

I made a thread on turbo dodge forums with most of the information. http://www.turbododge.com/forums/f7/f30/398608-1983-dodge-canadian-direct-connection-rampage.html Located in Edmonton, Alberta. Make me an offer, open to trades.

I have 2 trunk finish panels, one is for a 1967 barracuda and the other a 1969. I want to trade these for a 1968 Dart trunk finish panel and tail lights, or if it is a really nice trunk panel then just that so the deal is fair. Trades only

All 4 of my Dart's armrest bases are faded and I was wondering how I would "chrome" them. My best guess is the rattle can chrome paint but I haven't tried that yet. Any ideas/suggestions? Thanks.

I just bought a 1967 and I will be converting it to a 1968, the guy before me started it but was missing some things and grille bezels were one of those things. I have a lot of 1967-1969 Barracuda parts of anyone would like to trade for Dart parts. I also need 4 1968 marker lights. Thanks.

I need a bumper for my 1967 Dart as im going to be useing 1969 tail lights (I need these too) and the 1967 bumper I have is all mashed in. I have a lot of 1967-1969 Cuda parts that I can trade or I can just do straight cash, bumper will most likely have to be shipped. Also looking for a 1969...

Just bought the car today in Canmore, Alberta. The drive was from 9 am to 7 pm so I'm pretty tired right now, because of that there won't be a whole lot of information here for now. The Rundown I turned 16 in January this year, after saving everything last year so i could buy myself a...

I have a single pair of 340 heads, they are the same in every way however their casting is different, one is a "b" and the other is a "g", the B appears a little nicer but should perform no different. They have been hot tanked at one point but that may have been a while ago as their is some...

Is anybody using a motor plate in their dart, how did it turn out, were there modifications that needed to be made to mount it?

I have a 1969 Red Barracuda center console that I will be fixing up and selling, In order to send it in to be chromed I have to take off the wood grain sticker, when I took a swing at it came off in little pieces and was hard to pull off. I was thinking of using Goof Off but I don't have any on...

I'm looking for a 1968 Dart under $4000, the engine doesnt really matter as I will end up going with either a R3, R5, P7, 440, or Hemi. Looking for one that has been completely untouched, no torn down cars with parts on the side. Rust is Ok, the less the better, but I do not mind rusty quarters...

I have a pair of 308 heads, both intake, exhaust, and some of the chamber has been ported. The heads include a pair of 273 adjustable rocker arms off of a 1967 formula S cuda. I do not know the specifics of the port job or the CFM it flows, the head was my grandfathers and I wound up with it...