Search results for query: *

Hello Fella Been awhile Finally got back to the game. My 1973 Scamp is up and did a "break-in". Everything is looking good, but I need help #1 - where are these 2 tube connect to? #2 - Searched everywhere, but could not find the right Grommet for the valve cover? Please provide part number...

Not mine. Here to share. Good Luck http://sfbay.craigslist.org/pen/pts/5269731387.html It is in SF Bay Area for $450

Hello FABO Want to keep it stock? Original Exhaust manifolds pull from 1973 Plymouth Scamp, 318. Might fit 340 or 360 - Do your own research. - Passenger side - 3843953 w/heat riser - Driver Side - 3614395 - Also come with oven thing - What you see is what you will get All tabs...

Hello Folks It is a 1985 Roller Block with stock lifter. 302 heads Comp Camshaft XR268HR-10 Hydraulic Roller 273 Adjustable Rocker I've seen this set up somewhere but could find it. I'm looking for cup push rod with appropriate length that would go with this set up. Please advice with...

Hello Folks I have Edelbrock 2176 Performer Intake that would fit 318-360. It has been sandblasted, and ORANGE powder coated. It also has minimal gasket match before sandblasted. All threads are good and ready to bolt on. Intake locate in SF Bay Area and for sale locally as well. It is...

Hello Folks I'll be buying this 318 short block. The seller said it's a 1985 He stated "This was a new factory warranty replacement but never installed by owner" - What should I inspect for? This plan is just a daily driver for 1973 Plymouth Scamp with A/C, P/S, 904 transmission, and 7.25...

Here you go https://autos.yahoo.com/blogs/motoramic/watch-a--68--cuda-run-a-quarter-mile-on-two-wheels-through-power-alone-143400452.html

Hello FABO I'm looking for bottom end rebuild kits for 1973 "318". Search around and found: Engine Rebuild Kit Dodge Chrysler Mopar 318 5 2L OHV V8 1970 1973 | eBay Need advice on EngineTech. Should I or Should I not? Why? Thanks,

Hello FABO I'm thinking putting this on LA 318 for 73 Scamp. Any advice do and don't? Thanks,

Anyone running this. Please advice on Pro and Con http://www.ebay.com/itm/331064678417?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Thanks,

It is a 1973 stock Scamp with 318, A/C, P/S. Going from 2 barrels to 4 barrels carburetor. Using 2176 Edelbrock Intake with 1406 Edelbrock Carburetor. Ballast bypass using HEI (proComp) ready to run distributor with MSD Blaster II, 8082 ignition coil. Below is a bulk head connector...

Hello FABO I'm looking for pictures of 3 ways shoulder belt installation place and bolt for "a bodies" such as scamp, swinger to fit my 1973 Scamp... Thanks

Finally, i go my 1973 Scamp 318 all stock running with minor change such as: 2176 edelbrock intake 1406 carburetor Procomp HEI distributor with PC-91 Coil Mini starter Engine started at every turn Then i decide to connect the tachometer. After installation, i cranked the ignition...

Hello FABO I'm getting a pair of "302" head with 1.88" intake, 1.60" exhaust valve. Both head will have .509" spring. Heads will be bolt together with 273 rolloer rocker. I need recommend camshaft for stock bottom 318. This will be street ride and weekend cruiser. Thanks

Hello FABO What are the font for mopar's brands and models? I'm looking for: Dart Barracuda Scamp Swinger Etc....... Let share Thanks

Hello FABO Please advice bottom end rebuild kit for my 1973. Link would be helpful. This is what I gather so far. 318 stock bottom end (looking for upgrade). Something like 0.030" over 4323302 Head, open intake valve to 1.88” and exhaust to 1.60” with harden seat. 273 Roller...

Hello FABO I'm just about to mount oil pan onto an engine. Upon applying gasket and found there are gap in between (Red Arrows). Will this leak? it is a detroit Gasket. If it leak, any recommend gasket to have proper seal? Thanks,

Hello FABO I'm the the process of getting a "308" heads to the machine shop. These heads will seat on stock bottom 318, 904 transmission, and 7.25 rear. These are parts that I've been collecting so far: Procomp distributor Procomp E-Coil. Edelbrock 1406 Carburetor. Edelbrock 2176 Intake...

Duplicate, Please Remove Thanks,

Hell FABO I've read bunch of articles and threads about porting engine head, so I give it a shot. I recently acquire a set of "308" head from 1991 Ram Truck. I removed all valves and degreased the head. Visually, both heads look very decent so I didn't bother to take it to the shop to check for...

Hello FABO I'm in the process of converting from 2BBL to 4BBL. I found these wires and hope to learn where are these suppose to go to. Thanks,

She a beauty. Too bad, she's not mine http://sfbay.craigslist.org/eby/cto/3667048793.html

Hello FABO I'm doing carburetor upgrade on a "73" 318 with 4BBL Edelbrock 1406. I could not find any port for purge hose connection. Any idea and pictures would help. Thanks, Scamp:violent1:

Hello FABO I just bought a 4323302 head from Junk Yard. I was pull out from a 87 Dodge Ram150. It has stock 1.78" Intake and 1.50" Exhaust. I want to have machine shop to bore Intake to 1.88" and 1.60" for the Exhaust. Could I use "used 1.88" intake and 1.60" exhaust from a 360 head or I...

Hello FABO I finally got a chance to replace good old 2bbl with 4bbl intake. But when I dropped it it I learn that there is 2 open spaces as indicate in "RED ARROW". Is that normal or I had wrong intake? And are those plug holes "in Circle" are suppose to be perfect alignment or I have to...

Hello FABO I've been reading alot of 318 engine with 360 heads. I found late model 1998 5.9 360 heads. Just want to ensure will it fit 1973 318 Engine before I make purchase. Thanks, Scamp

hello FABO Has any one tried this setup for stock or modified 318 yet? What is the pro and con of this set up? http://www.ebay.com/itm/290777249130?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Thanks 73scamp

Hello FABO Can 73 Duster front Bumper fit into 73 Plymouth Scamp? If not what are made and year is interchange with 73 Scamp Thanks, 73Scamp

Hello FABO I was doing some inspection on the distributor and found this thing dangling around the coil with green wire attach to the coil and loose on the "U" end. If it suppose to be there, where should it be connect it to? Thanks, Scamp

Just bought used Edelbrock Intake 2176 for 1973 Plymouth Scamp, V8, 318. I found out my Scamp has EGR connection. Can I use 2176 intake and eliminate EGR? If I ignore EGR, what would it do to my engine and fuel things......??? or I need to go to Intake 3776 which has EGR connection. Thanks, Scamp