Search results for query: *

I need heater control for non ac 1972 duster, can you send photos of the part you have and how much you want for it

do you have the heater control? Look for non AC to fit 1972 Duster

is this still available

Do you have the heater control, I'm looking for non AC unit for a 1972 Duster

do you have the heater control for this. I'm looking for non AC for a 1972 Duster

do you still have cluster? Do you have heater control unit?

I think I have an almost new set of 10" by 2 1/2" drums without fins. They are 4 1/2" bolt circle 5 stud.

I have a 1972 Plymouth Duster 340 and the rear end seems to sit high. The previous owner installed MOPAR Super Stock Springs 2800 pound Summit 4120683/4 springs on the car. Does anyone know the baseline ride height measurements and where to take these measurements so that I can compare my...

thanks for the photo

can you send photos of the back side?

I have the same question on proper installation of jack spring for a 1972 duster. The photos on the thread are no longer there. Does anyone have a photo of proper installation?

do you have a photo of how this system looks in the vehicle?

will this fit on a 1972 Plymouth Duster with 340? Will this provide more air flow and lower temp?

Does anyone have a hose routing diagram for a 1972 Plymouth Duster 340? Some of the hoses are there and some are missing. I'd like to rebuild it properly. Does someone sell a full restoration kit?

Hagerty on three cars and I also have the 100 mile tow package

I was detailing some items on my vehicle and noticed that both rear springs where part number P4120863. The Driver side is oriented with the 'partial 'helper spring' pointing to the rear of the vehicle and the Passenger side has the 'helper' pointing forward. Doing some research on this part...

Thanks for the photos, that will help. I'm not so informed on these Mopars. I used to work for GM and when I was young, these Dusters used to take me in my 1962 327cid Chev; so I spent some of my children's inheritence and bought one. I believe the distributor is stock, so I will look at...

The engine is a small block 340. I have not checked the timing, I will do that next.

Yesterday I verified the firing order and spark plug wiring. I noticed something strange. The normal orientation of the #1 spark plug wire is at 12 oc'clock with the 12 o'clock pointing to the front of the vehicle. My distributor was set up by the previous owner by having the #1 wire at...

Sorry for the typo; it was meant to be 'tailstock'. The bushing was replaced, and the play is gone. The shop also tightened up the nut on the pinion. The vibration is a little improved, but still objectonable. It is like a 'hum'. There relly is not much of a feeling in either the seat or...

I'm interested in 2 hole Duster

I bought the car about three months ago and was aware that there was a vibration. So far I have had tires spin balanced (off the car). In doing this we found two rims and one tire that had runout. I replaced the rims and tire, but vibration is still there. This week, I'll have the tail shaft...

I have a 3:23 Sure-grip rear differential. Does anyone have a photo of the proper stud to place the SureGrip tag and the Ratio tag?

I have a vibration in my 1972 Duster at 45 MPH. One of the items I have noticed in my analysis of the issue is that there is some movement of the yoke at the end of the transmission tail stock. Does anyone know what amount of movement is normal?

The casting numbers on my 340 in my 1972 Duster are "1 21 71'; signifying a casting date of January 21st, 1971. The stamping on the front of the engine block has; "33790169"; which I interrupt is December 2, 1971 on the Chrysler 10,000 day calendar. The VIN decoder for the fender tag says...