Search results for query: *

Hi everyone, my name is Kameron Alu, I'm 16 years old, and I attend Marina High School in Huntington Beach, California. Students at our school have been given the opportunity to travel to Costa Rica this Summer. I really wanted to go, but a few months ago my dog, Artie, got really sick and was...

So today I was trying to access some bolts on the air intake. (It's a Monday, so I'm not thinking straight) I started removing what I thought was the heater tube (actually coolant tube from the intake to the water pump). I pulled it off and surprise! about 1/3 of a cup of coolant came out. I...

I currently have an RV cam (not sure of the specs) in a 318 from 1967. I am thinking about upgrading the cam to a summit racing cam (285 duration, .480 lift) or maybe something bigger than that. Would I need new valves or valve springs ( I think the current ones are stock)? Also, would anything...

Hi! I have a 74 dart sport that has a 318 and an automatic 727 from 1967. It originally had a slant-six and an automatic 904. As of now, the way the shift linkage is set up makes it so the needle on the gear indicator doesn't match up with the letters and it can't shift into first manually. I...

So today I went to start up the Dart. The first time I turned it over, it was fine. I let it run for a few mins and then I turned it off. When I went to turn it on again (only a few mins after I turned it off), the starter wouldn't engage. I moved the shift handle a little, and then tried to...

So I just got 4 new Bilstein shocks and the front ones went on just fine. However, I am having trouble with the rubber on the rear 2. The rubber is making it hard to put the shocks onto the bolts attached to the car. They seem too tight to get on. I have tried grease and freezing the rubber, but...

Does anyone know if a 8 and 3/4 rear axle from a 1968 B- body would fit in a 1974 dodge dart sport originally with a 8 and 1/4 rear axle (A- body)? The 8 and 3/4 axle is a 3.23 sure grip and the 8 and 1/4 axle is a 2.76 peg leg. Would I be able to just swap out the two? Are the measurements the...

So, I'm a young first time Mopar owner, and I have lots of problems when pumping gas into my 74 dart sport. The nozzle almost immediately stops when I start releasing the gas and there is generally a large amount of spilled gas drops. Anyone know how to use gas pumps so they work with older...

On our 1974 dodge dart sport, we recently had the brakes redone. New calipers, drums, rotors, and a new master cylinder. All have been bled and the master cylinder was bench bled before it was put on the car and before (but not after) the new brakes (rotors, calipers, drums). Every time we take...

On the 1967 318, we have a sticky lifter. We hear it at idle, but it goes away when we rev it and the oil pressure goes up. It then returns at ilde. The engine did sit out of the car and didn't run for at least a year . We tried an oil additive, but that didn't work too well. Also, it is only...

Recently, our 318 started making noise when running. Ever since we got it running , the timing has been weird. After starting it up one day, the car shook more than normal , and was making a funny noise. When we took all the belts off, to get to the harmonic balancer, we saw it was loose (that...

Hi. We use a pertronix 3 system on 67 318 in a 74 dart sport. Timing is ok at idle checked via timing light. When revving the engine , the rev light goes out , and the engine suddenly stops . After a half second or so, the engine sparks again, with a healthy timing idle. We know it has to be...

Hi. We use a pertronix 3 system on 67 318 in a 74 dart sport. Timing is ok at idle checked via timing light. When revving the engine , the rev light goes out , and the engine suddenly stops . After a half second or so, the engine sparks again, with a healthy timing idle. We know it has to be...

In our 74 dart sport, the speedometer and temperature gauge are not working. The two gauges do not move at all. However , when the headlight switch is pulled out, the speedometer jumps to around 7 mph and then drops . Any help?

We are running a 67 318 in out 74 dart sport. The 318 has a 4 bbl carb, RV cam, headers, and I zero decked. We are using a 70/30 radiator fluid/ water mix in a two core radiator. The engine seems to be getting really hot when we feel the radiator hose. Is a two core radiator enough cooling or...

As of now, I have a 8 1/4 peg leg rear axle with 2.76 gears. I am thinking of upgrading to 3.23s or 3.55s. I drive mostly around town and a fair amount of time on the freeway. I occasionally make 300 mile trips out to lake Havasu. I have a few questions regarding the new gears. 1) difference...

I have a 74 dart sport. I would like to install a hood release cable, but I cannot figure out where it mounts to the dash, where it goes through the firewall, and where it attaches to the latch. Any help or pictures on how / where to do this?

On my 74 dart sport , the front brakes do not seem to be working. Last night we took it out for a ride for the first time , and the brakes seemed lazy. When we got out of the car , the front disc brakes were still rusted over and were not warm at all. We bled the brakes and got a new master...

Recently, my father and I got our 318 running and the car driving. We got it back from the exhaust shop yesterday. We then took it out to test out the kick down cable and how it was shifting. But then, the engine started making two funny noises. One is a clicking sound ( likely a stuck lifter ...

We have yet another problem (they are endless lol). Yesterday, we were able to get the 318 fired up nicely. When we went to start it today, it would fire up when I engaged the starter, but would cut out as soon as I released it. I can smell a lot of unburnt gas. We know that: 1) The problem...

We have run into a bit of a problem. The car won't turn over at all now. We can't figure out why. We know the battery , starter , and starter relay work. We have connected (at least what we think is) all the wires for it to be able to turn over. Some of the wiring is mixed stock (inline six) and...

I have a petronix 3 coil and the petronix 3 ignition module in the distributor (distributor is set up). For the electronic ignition, would i have to install any other electrical boxes or wiring? It already has a new wiring harness for a v8. What I am trying to ask is if anything extra is needed...

I have a 74 dary sport . How do I remove center steering link bar? We need to take it off to get headers on.

What is the difference in feel, ride, and functionality of soft vs stiff shocks? What would be better for a play car( fast cornering, sporty handling, etc)?

I have a 1967 318. It has 3" headers on it, but we will be reducing it to 2.5" so it isn't too large. I would like to know what kind of mufflers to get for it. Will have no cats 1) I'd like it to be less agressive/ more mild, but hear it at WOT. (Im getting cutouts, so no need for it to be...

Hey guys! I have a question for anybody out there. I would like to know what the net HP/ torque on my engine might be. Here's the stats: 1967 318 (gross: 230 hp, 340 tq). Hooker full tube headers( will have h pipe , 2.5 inch tubes, and flowmaster hp-2 mufflers. Edelbrock 600 cfm carb and...