Hi Matt,
its located at 13311 W Hillsborough Ave.
Its an independently owned (by me) Meineke Car Care Center.
It's not your normal Meineke!, We currently have two extremely experienced Master Mechanics and two excellent B level Mechanics. My manager was lead mechanic from a shop that built...
Hi,
I am looking to hire an additional mechanic in the Tampa area. Must be honest, hard working and have a passion for cars. Looking for anything from good GS and up. We work on anything but were very Chrysler and classic car friendly! :-) Top of the line equipment and very family oriented...
Doesn't leak but worst looking thing on car.
Who makes the best windshield gaskets?
Also, any idea of someone in Tampa, FL area with experience removing & replacing these windshields? Don't really want to try it myself unless I don't have another choice.
Thanks,
Darin
Hi, I have a 67 Dart GT and installed new windshield several years ago with 68 gasket and stainless trim.
The problem is that I noticed that the glass has slid lower down in the gasket and the gasket looks kind of deformed in the four corners.
Anyone ever have this issue or have any...
I have a set of Hughes heads with the 2.08 intake valves and have been struggling with issues since assembly. The motor has plenty of power but one head runs a cooler temperatures then the other and the plugs look different on one side versus the other. I thought it was something with the fuel...
Thanks for the reply,
The problem is that those are only on the bottom of the bumper so you can not use any of the license plate frame holders that need the top holes.
I would be interested if it met the following:
-allowed for running exhaust out the rear
-Eliminated issues such as suspension bind associated with other systems
-provided excellent handling (autocross & track)
-required modifications were manageable
-cost under $5k
Thanks,
Darin
Hi,
I am having an issue with the window sweeps (new) on a 67 Dodge Dart.
The rubber from the window sweep grabs the glass when raising the window and pulls the sweep edge up resulting in the edge being up instead of down causing problems when you go to lower the window. I end up using a...
I would be willing to drop it off at the UPS store if they are willing to package and ship but I bet it would not be cheap.
I really just posted these up for what I have in the metal in case someone needed them before using the metal for another project.
So this is a non profit endeavor! :)
For sale 2 sheet metal blanks left over after construction of my Dash (also pictured as reference).
They are 16 gauge steel, templates were made from my unmodified 67 dart dash and were cutout on a CNC table and accurately bent to match dash.
It took a little less than 1 hour to hand file...
Hi,
I am considering driving down to Georgia for the Mopar Southern Classic next week but since it is a 8 hour trip each way wanted to get a feel for the size of the event.
How does it compare in size to shows such as Mopars at Don Garlits or other well known shows?
Thanks,
Darin