Search results for query: *

Too funny, I read your entire thread on Sunday, and ran out to my car to see where my fuel line was running, and sure enough, it's at the factory location, I was so hopeful, then let down. If you look at my first post, I made sure to note "fuel lines are in the factory locations", because of...

I forgot to mention this (it was so long ago). When I got the car 8 months ago, I went to hook up a Tach in the dash, I noticed that the coil was wired backwards, but it ran. I switched the wires from + to - and visa versa and she still ran the same, could this have caused damage to my coil...

Found it for $23 bucks, even cheaper, thanks.

Joe, As usualy, you're the man, thanks for the quick reply. Do you think this will solve a stalling condition and hard starting when hot? I figured for $35 bucks its worth a shot?

I have a question, I want to replace my orange box, I think it's going bad when it gets hot. Autozone has one for $35.00 but it has 5 pins, and my orange box has only 4, is this an issue, will it work?

OK, I've got a 340 in a '68 Cuda, Mopar electronic dist, orange box, mild cam, timing is fine, vac. is fine, don't know what my fuel pressure is, but its a stock fuel pump, and fuel lines are in the factory locations. The car starts and runs great from a cold start all they way up to about an...

Found them, figured I'd post my findings for anyone who may need them down the road. I found them at two places, Just Mopar had the better price. I cannot believe these are so expensive, for a little piece of plastic, but these are OEM, not repro...

Hi, anyone know where I can find the seals (they bond to the front edge of the glass and contain the window run guide) that run in the front window track for a 68 Cuda?

340, I posted these at the beginning of the month, I was in the same boat for the bracket mountings, hopefully it will help. Also, there are more pics in the thread I started back in Feb (below). Let me know if you need other pics, I have a '68 Cuda with a 340 & factory air...

Tensec, Are you familiar with the L.I. Mopar Club? It's free and we meet all over the place, pretty cool cars and members too. Let me know if you want some info.

I really spent my time grinding and fitting, grinding and fitting, so 100% of the center sits around the hub, I know exactally what you're saying. As to the front, I havent had a chance to pull a front wheel and check it, the back is fine, and the overall height is abot 1 1/2" less the the...

I just went through this last week. I have 215-70-14's all around and wanted to finish my trunk and have it flat, straight across. I went to the scrap yard and found a 16" compact spare from a '05 Corolla (I know lol), it fits the same small bolt pattern that I have and fits level with the rest...

Snake, coming from you (carpet professional), that means a lot, thanks for the kind words, I can't believe how well it came out, I had my doubts, but in the end, I'm very happy. The only downside was taking two days to get all the sticky crap off of the soles of my sneakers, you could hear me...

Check this out. 4x8 sheet of Masonite - $11.00 Trunk Carpet - $21.00 2 Cans of Spray Adhesive - $8.00

Ken, I'd give Ron (I think that's his name) a call at MegeParts, he's been very helpful to me, here's his number. PH: 608-452-2045

Something like this? Here's the link. http://www.megapartsusa.com/proddetail.asp?prod=132%2DHC926

Thanks for the input, what do you think about this thought. I'm now wondering if I will see a noticable differenece if I left the 215-70-14's in the front alone, and replaced the same in the rear with 245-60-14's on my 14x7 Cragars SS's, the spacing looks to be fine, but do you think an inch...

So, does anyone know what is the widest size 14" wheel I can possible get in the back of my '68 Cuda Fastback. What size tire should I put on it and what should the backspacing be (with stock suspension)? Thanks in advance for your help.

You know, the more I think about it, the more I agree with both of you. As to the space saver spare, does anyone know what space saver would fit my sbp?

Hi, I'm looking for a complete jack set up. I have nothing, no hold down, spring (don't even know if one is needed) etc... Please let me know if you have it all including tire iron. Condition not an issue, I can restore and would prefer that way anyway (it will keep the cost down), this is not...

Thanks for the pics, nice ride!!!! Now I just need someone to tell me if the backspacing on the 14x8 at 4.25 will clear everything.

Pics would be great, how much spacing do you have between the tire and leaf spring?

I've searched and searched, but can't seem to get a definitive answer, so here we go. I have a '68 Cuda Fastback, SBP, all stock suspension with a 7 1/4 rear, 14x7 all the way around, sitting on 215 70R14. I want the staggered look, so I wanted to know if 14x8 with 4.25 backspacing would fit in...

340, Maybe you can answer this question. I bought the fan shroud and the cage nut & bolt kit for my '68 Cuda, but it looks like the screws are too long and will go into the rad fins, is this correct. I have the repro shroud and correct repro nut & bolt set (same as you have pictured), and just a...

Thanks for the reply. Here's where I'm at (sorry to steal the thread but I think this will help out all). I sent my hoses to Classic Auto Air in Tampa, Fl to have them restored, and they are putting the barrier hoses on there ($126.00 ea.), he told me other than the normal replacement parts that...

I was told that if you convert from R12 to 134A, you need to remove the EPR valve and Orifice tube, any truth to that? Otherwise, the rubber lines need to be changed, but everything else will work. Any thoughts?

You mean something like this? This should fit all A Bodies. Here's the link. http://www.racepages.com/products/?D=plymouth+&Ntt=plymouth+&Dx=mode+matchallpartial&Ntk=Main&Ntx=mode+matchallpartial&N=7039+4294965084&Nty=1

Agreed, but what if buying a part like this has no other option?

340s, thanks for the reply & pic, I'll see what mine does after I get it installed. Hopefully, it will be from some new stock, but I never have that kind of luck!

I just purchased one through Hoover, I didn't get it yet, but I was wondering if anyone has a picture of where the warping occurs. Is it possible to install a metal strap along the top and bottom egde, paint it to hide it (if that's where its warping) to keep it securely tight against the rad...