Search results for query: *

thanks for the suggestion, but I guess there is more wrong than just the case. The input shaft and bearing retainer are also pretty pitted as well as the synchro. assemblies being pretty worn out. Figured it would be cheaper to replace than repair! Ben.

No good four speeds out there for sale???Ben.

looking for a rebuilt or like new A-833 transmission for a 70 Dart. Have a used one, but the case is bad. Would like something that can be bolted in with no problems, Thanks, Ben.

anyone have some lockout linkage for a 70 Dart with a manual transmission? Looking specifically for the adjustable piece of linkage that attaches to the steering column and then to the cross shaft. Would also be interested in a cross shaft although I believe I can adapt the automatic...

Looking for a 70 only manual transmission key lock out linkage. Need the piece that goes from the steering column to the linkage cross shaft. also have a thumbwheel style AM radio in the rally dash. Looking for the rear brace that secures the radio to the lower edge of the dash. 70 Dart jack...

have been able to get the key hole clip, k member/core support bracket and the washer knob...........still looking for the clips and screws that hold the chrome bezels to the front of the hood scoops and the 70 Dart jack assembly. Any help out there??? Ben.

wtb--70 Dart Swinger hood scoop clips that hold the chrome bezels on the front of each scoop opening. Need 3 or four. first picture is of a sample of what I need. Also need the keyhole clip that holds the 'thumbwheel' style radio in the dash of a 70 Dart with the 'rally dash'. Second and third...

am looking for a retainer stud that holds a thumbwheel style radio into a Dart with a rally dash. Could also use the 2 larger style nuts that thread onto these retainers also. The first picture shows one installed in the dash in the upper corner. The hole with the slot in the lower right corner...

Am looking for three exterior 'Swinger' emblems for a 70 Dart. I have a couple of the 3 spin variety, but am looking for new or like new 4 pin emblems. Could also use a 'Dart' emblem for the trunk lid in new or like new condition. Please PM. Thanks, Ben.

Looking for some emergency brake parts. Picture is of what I need, but for the drivers' side of the car. The picture is of the parts on the right side. 70 Dart with an 8 3/4 rear with 10x1.75 in. shoes. Any help would be appreciated. Thanks, Ben.

I have a 727 driveshaft that came with the car and it is approx. 4 in. shorter than needed for the manual A-833 trans.. My interchange software shows the length, (weld to weld or center of u-joint to center of u-joint, I don't know which?), of the auto trans driveshaft as 48 in. with a tube...

WTB........manual transmission driveshaft for 70 Dart Swinger 340. 8 3/4 rear with the small yoke. Want something that is dent free.....either used needing rebuilding or rebuilt. Thanks, Ben.

looking for a complete jack assembly for a 70 Dart. Thanks, Ben.

........what kind of finish was originally on the inner splash shields? Have a 70 Dart Swinger. Are they painted body color, black, undercoated or what? Thanks, Ben. (Sorry for the question here, but didn't think it worthy of a new thread.)

am looking for the right side 'A' pillar vinyl top trim. enclosed picture is what I need. Also looking for a knob for the wiper switch on a 70 model Dart with the rally dash. no idea if the standard dash knob is the same or not. Thanks, Ben. still looking for the manual transmission...

WTB--65-71 Dart V-8 manual transmission dust covers.......I need the inspection cover that attaches to the bottom of the bell housing, as well as the dust shield that extends across the lower front of the bell housing and the starter goes through on the drivers side. Please PM. thanks, Ben.

Looking for a standard transmission flywheel inspection cover and the dust shield the starter goes through. Both parts attach to the bellhousing. Working on a 70 Dart 340 4 speed car. Thanks, Ben.

thank you badlilred79! Have the air cleaner coming! Still looking for the wheel opening moldings! Any help? Thanks, Ben.

looking for a new or used 340 six pack air cleaner assembly. (would also be interested in one of the aluminum 'tri power' air cleaners if someone has one available.) Ben. also need a set of full wheel opening moldings in excellent condition for a 70 model Dart coupe. Thanks.

thanks for the info!! ordered from R/T specialties this morning. Ben. if anyone else needs these bushings for the A/B model 2 speed wiper the part no. is 1000381. Includes the three black arm bushings and the round, white wiper motor bushing and clip.

bump. How about some wiper transmission arms with good bushings? Ben

looking for some replacement wiper arm bushings for a 70 Dart with a 2 speed wiper. These are the black plastic type. Need three of them. Ben.

bump. anybody have upper column parts for a floor shift column? Ben.

Want to buy: 70 Dart floor shift power steering column. will rebuild if necessary. thanks, Ben. ( would be interested in just the upper column parts if available!)

WTB 70 Dodge Dart non AC heater box. Am looking for a very nice unit without cracks or problems, if possible. Don't need the heater core or blower motor. Unit I'm replacing has part no. 2936864 stenciled on above the fresh air door. Included are a couple of pictures of the unit I'm looking for...

WTB 70 Dodge Dart non AC right side heater box with a good door and hinge. Could also use a good left side air box with good door and hinge. Would like pieces in very good condition, no cracks or pieces missing. Thanks! Please PM. Ben.

WTB 70 Dart 2dr. hdtp. drip rail moldings, left and right complete. Also looking for the front, small vinyl top trim pieces that attach at the top of the 'A' pillars, between the top of the windshield molding and the drip rails for both sides. Ben.

I will be using a power steering gear box, if the column is different for a manual trans., manual steering column. Ben.

Wanting to buy a floor shift column for a 70 Dart. Ben. Am doing an auto to manual changeover if it matters.

Looking for a NICE set of wheel opening moldings for a 70 Swinger 2 door car. This car does not have the rocker molding. I am not sure if the w.o. moldings for the 'non rocker molding' cars are longer, but if they are would prefer those. Ben.